pro access tail gate

[Swaine]

(Apologies for the cross-posting)

In today's news:

Was that your actual build date or was it delayed?

Sponsored

 

[lrb_35128]

Congratulations.. with the PAT I’m assuming.. You got this today?

Yes, with the PAT.

Yes, the update was posted yesterday (Sat.) - I had checked Friday after 5pm (CST) and it was listed as, "In Production"

Was that your actual build date or was it delayed?

My original build date was delayed one week, but my blend date (09 May) did not change once I was able to access the window sticker. (Which BTW, shows ZERO deletes.)

I called Ford Marketing (because for some strange reason, they have the most information available) and was told scheduled delivery to my dealer is between Memorial Day and D-Day.

So, provided there are no QC holds, the truck *should* be in transit this coming week and available for pick-up the following week.

 

[Swaine]

My original build date was delayed one week, but my blend date (09 May) did not change once I was able to access the window sticker. (Which BTW, shows ZERO deletes.)

I called Ford Marketing (because for some strange reason, they have the most information available) and was told scheduled delivery to my dealer is between Memorial Day and D-Day.

So, provided there are no QC holds, the truck *should* be in transit this coming week and available for pick-up the following week.

For sure. That ain’t too bad. I still don’t have access to my window sticker and I’m only 11 days away from the build date. I’m guessing I’d get access to it in a few days.

 

[lrb_35128]

I’m only 11 days away from the build date. I’m guessing I’d get access to it in a few days.

 

[lrb_35128]

Window sticker is generally available 10 days out. - Check again tomorrow after noon.

 

[wyoming]

My PAT-equipped Platinum was built on 4/29 and has been sitting in Dearborn ever since…

If it ever manages to get out of QC hold and on to a train, I’ll gladly share some photos!

 

[mpk]

any particular sales rep you worked with at Granger? Saw a 402a tremor with no PAT on a local dealer lot here in the PacNW and laughed when I saw a ADM sticker with $2,000 for dealer profit and then another $1500 for something called a NW protection package???? 83,000 for this truck.. WTF

 

[Kodiak]

any particular sales rep you worked with at Granger? Saw a 402a tremor with no PAT on a local dealer lot here in the PacNW and laughed when I saw a ADM sticker with $2,000 for dealer profit and then another $1500 for something called a NW protection package???? 83,000 for this truck.. WTF

Just reach out to Granger and you will probably get Chip. He was great for my purchase of a 2022 Lariat PB. Just do a search for "4% under invoice" and you should get Grangers main 2024 thread and they have a link to their internet sales. 2024 orders may be drying up and closing out but you can ask. They are great and have internet sales down to a science.

 

[WalterMitty]

any particular sales rep you worked with at Granger? Saw a 402a tremor with no PAT on a local dealer lot here in the PacNW and laughed when I saw a ADM sticker with $2,000 for dealer profit and then another $1500 for something called a NW protection package???? 83,000 for this truck.. WTF

Yikes! I have a 2023 Tremor (402A, V8) that is fairly well optioned. I just went out on the Ford site and did as close a build as I could to my truck and the total was a bit over $80K! That's obviously before any dealer prep, fees, etc. My sticker (which I did not pay since I bought through Granger) was a tick under $74K. So it's about a 9% increase, with the only big changes being a forced goofy tailgate and the removal of the projector LEDs.

Sponsored