Non B&O EQ correction

[rado]

Hey all, looking at changing the door speakers, tweeters and adding a sub to my 24 PB (Non B&O). I have the PAC harness for getting the signals of the front and rear speakers, but saw some conflicting information on DSPs. I currently have a LC2i that I brought over from a previous vehicle, but am unsure if this will work with these fords (specifically the non-amplified version).

Also trying to figure out the best way to add this setup (currently have a mono amplifier and subwoofer, along with the LC2i), and not sure if just getting a 5 channel amp and running high level inputs would work with the EQ corrections (as I understand it, the non-B&O don't deal with roll-off and only have an issue with the EQ curve to prevent blown woofers in the doors).

Sponsored

 

[Porpoise Hork]

I want to say that @dmac had messed with these and would know the Forscan settings to change depending on what you're wanting.

But I could be wrong.

 

[dmac]

I want to say that @dmac had messed with these and would know the Forscan settings to change depending on what you're wanting.

But I could be wrong.

I would atleast do the flat eq change I described in here

https://www.f150gen14.com/forum/threads/speakers-best-bang-for-the-buck.12532/post-411966


I havent done any work with an amp though so probably some experimenting for you to do.

Sponsored