How To Install Factory 360 Camera System

[dannggg]

150 for impa used junk yard + 20 percent coupon eBay. And the rest. Oh fuck. U right forgot about the cargo cam. That was 250 but I didn’t add that one yet too lazy lol.

Sponsored

 

[dannggg]

also just wanted to point out found 3 listings for this cheap for both. It’s a patience game or it’s the fact I live in Florida for work right now and everyone sells f150 parts there lllol

 

[dannggg]

(It has camera btw above). Someone bought it for him and now selling for 700 lmao

 

[Tlusk7]

150 for impa used junk yard + 20 percent coupon eBay. And the rest. Oh fuck. U right forgot about the cargo cam. That was 250 but I didn’t add that one yet too lazy lol.

and what about front cam, coax, wiring, pins? I think you are saying it was only $600 so your wife doesn’t figure it out ?

 

[dannggg]

Forgot to mention I got front cam for free lol. Ford emblem was 60. I would 700 ish now.
Oh And the cargo came I didn’t get to use. Was not thinking of it because I didn’t even use it yet lol

 

[1ockdown]

Recently installed everything, getting 5 dtc codes. All of my cameras definitely work, but forward collision and lane keep are disabled, the calibration will not take. The U codes are preventing me from saving.


C1001:78-2F


U0253:00-28


U2101:00-2F


U2107:68-2F


B15F0:15-2F

I’m not really sure what to do, ive verified things up and down on my install and my configuration.

is it possible my IPMA is a mismatch?

 

[dannggg]

Recently installed everything, getting 5 dtc codes. All of my cameras definitely work, but forward collision and lane keep are disabled, the calibration will not take.


C1001:78-2F


U0253:00-28


U2101:00-2F


U2107:68-2F


B15F0:15-2F

I’m not really sure what to do, ive verified things up and down on my install and my configuration.

is it possible my IPMA is a mismatch?

Load your original as built back. It’s using its old impa existing configs not related to your truck. I had the same issue.

Then follow the impa instructions on the guide. Mines was telling me I have sensor issues. (Front sensors. Park aid stuff. And all. Just load back your original configs )

 

[1ockdown]

Load your original as built back. It’s using its old impa existing configs not related to your truck. I had the same issue.

Then follow the impa instructions on the guide. Mines was telling me I have sensor issues. (Front sensors. Park aid stuff. And all. Just load back your original configs )

that makes sense. Pulling my asbuilt from motorcraft should be fine, right?

 

[1ockdown]

Load your original as built back. It’s using its old impa existing configs not related to your truck. I had the same issue.

Then follow the impa instructions on the guide. Mines was telling me I have sensor issues. (Front sensors. Park aid stuff. And all. Just load back your original configs )

Just to be clear here, I've done this before. I end up with C1001:78-6C only. I try to calibrate, calibration fails due to U2107:68-2F "Collision mitigation by Braking"

 

[n_2002]

Hi all,

I have followed the thread and have all my cams functioning. I had reached out to infotainment about getting a programmed IPMA but was told it’s not something currently being offered. I ended up going to eBay route for a donor unit.

I am getting 3 DTCs in the IPMA. Lane centering calibration immediately goes to 100% and I am still getting errors for LKA/Fwd Collision.

Does anyone have any suggestions? I think I’m probably needing to make some additional changes in Forscan to resolve.

(For reference, I loaded my saved as-built and then made the IPMA changes noted in the write up).

 

[15FoxRzr]

I could not have done this without the help of @Jesse-Infotainment so major props to him. I am providing a link to my google drive that will have my write up and Jesse's parts list with some additions and updates I made. The drive also has all schematics needed as well as workshop manuals needed for the installation. If you do not already have a 12 inch display, you must upgrade the APIM. @Zhenes has been through this and can possibly help you, or you can reach out to Jesse.

If you are looking for the front cam, it is cheapest to buy the emblem and camera together on ebay, if you need to buy the camera seperate you can order your camera Here. If the link breaks search part number #ML3T-19G490-B and the seller is azparts01.
Try looking for the cargo cam on ebay, mutiple sellers on there with good deals, if you buy a new IPMA from ford it will have to be PMI. Mirrors can be found all over facebook, ebay, and this group. Whatever you order from ford parts, keep all of the packaging until you are done and have working 360 cams so you can return anything if needed.

If you do this using this information and would like to say thanks, message me and let me know you were successful or make a post here in this thread. I would love to hear how many people this helps!

Google drive link is located HERE
Youtube video is located HERE

Great info. Thank you very much!
Todd Goetsch
Templeton, CA

 

[BhamDCam]

I thought maybe the front and rear had to have the PJ7Z-19G490-B camera so I bought another one and then I reread your post about the front being the bb/bc camera which I have a couple of extras. The only ones that show blue screen are the PJ72 cameras. They are also used in the Lightnings (that is where I got the reference from).

@jhwalker Hey, Lightning owner here. I'm starting to gather the hardware needed to install the 360 cameras on my 2023. Seaching for the correct front camera has shown conflicting info. What you said above is the only thing I've found about a Lightning-specific front camera.

I can't tell if PJ7Z-19G490-C is the correct part number for the Lightning, or if PJ7T-19G490-BB is correct? But you also reference a part number here with PJ72...?

Some eBay listing are confusing, such as this one, where the listing title has PJ7Z-19G490-C, but the picture of the camera itself shows PJ7T-19G490-BB. Would a camera with either part number work?

Would be much appreciated if you could point me in the right direction. TIA!

EDIT: after some further searching, it looks like part ML3T-19G490-BC might also work? Just confused by it all.

 

[jhwalker]

@jhwalker Hey, Lightning owner here. I'm starting to gather the hardware needed to install the 360 cameras on my 2023. Seaching for the correct front camera has shown conflicting info. What you said above is the only thing I've found about a Lightning-specific front camera.

I can't tell if PJ7Z-19G490-C is the correct part number for the Lightning, or if PJ7T-19G490-BB is correct? But you also reference a part number here with PJ72...?

Some eBay listing are confusing, such as this one, where the listing title has PJ7Z-19G490-C, but the picture of the camera itself shows PJ7T-19G490-BB. Would a camera with either part number work?

Would be much appreciated if you could point me in the right direction. TIA!

EDIT: after some further searching, it looks like part ML3T-19G490-BC might also work? Just confused by it all.

I'm out of the US for a couple weeks but I think I still have the PJ7Z camera. If I do, I can send it to you to see if it works. If so, I'll sell it to you, if not you can send it back.

 

[BhamDCam]

@jhwalker Sending you a DM now.

 

[1ockdown]

Is there any insight into the model year IPMA vs vehicle model year compatibility? It seems the IPMA I bought from @Jesse-Infotainment has a 2022 production date on it, making it MY22 or MY23. I have a 2021. The cameras themselves work, and I was able to successfully calibrate the 360 part, but it seems forward collision/lane departure camera doesnt want to stay calibrated.

Has anyone struggled through this? Is it a big deal?

I was lucky enough to @SilverPigeon look over my configs and im grateful for his help, but we've hit a block in getting the calbrations to take.

Sponsored