Help Identifying Connector?

[derrickp10]

Hi all,

Can anyone help identify the connector below from a 2022? I'm working on a harness for the shifter swap and I'd rather have the receptacle for this plug than splice the wires.

The plug in the picture connects to the column shift gsm. It is labeled connector C2503 for the gsm, C218B for the clockspring, and C3385 for the Multi-Contour Seat Module in the workshop manual. Any help would be greatly appreciated.

Sponsored

 

[Hank573]

Here is a PDF I found of Motorcraft(Ford) connectors. Hopefully you can find it listed...the one I was looking for wasn't. Good luck! If you come across a video plug for the 2022 sideview mirror let me know...

 

[Wes1963]

Contact Jesse @infotainment. I got my harness from him and it was plug and play. They also offer a kit with everything you need.

 

[Hank573]

here is pix of the connector I am looking for...any suggestions greatly appreciated...it's the brown color connector...

 

[derrickp10]

Here is a PDF I found of Motorcraft(Ford) connectors. Hopefully you can find it listed...the one I was looking for wasn't. Good luck! If you come across a video plug for the 2022 sideview mirror let me know...

Thanks! I happened to run across that yesterday. Unfortunately there isn't a pigtail made for that connector but there is one in there for the console gsm.

Another user was able to give me a lead and I found the exact receptacle for it.

 

[JScaro]

here is pix of the connector I am looking for...any suggestions greatly appreciated...it's the brown color connector...

Are you looking for just the connector? That's the coax for the camera ML3Z-10E929-DBA

 

[Hank573]

Thanks, I'll check it out....I found a Farka connector that seems to fit...but now have to find out which pin triggers the camera on. Thanks again

 

[JScaro]

Thanks, I'll check it out....I found a Farka connector that seems to fit...but now have to find out which pin triggers the camera on. Thanks again

NICE! Thanks for sharing. One day I'll get to install my 360 cameras set up and this might come in handy.

 

[personalt]

Thanks, I'll check it out....I found a Farka connector that seems to fit...but now have to find out which pin triggers the camera on. Thanks again

ML3Z-10E929-DBA is the cable you need to go from there to the connnector in the door jamb. The connector from IPMA then then meets at the door jamb

 

[Hank573]

Thanks for the info on the video cable. I ordered one to check it out, but what I can't figure out is how Ford is powering the camera though this cable. The last truck I did 2011 it was a molex connector with separate video and power pins...Thanks again

 

[personalt]

Thanks for the info on the video cable. I ordered one to check it out, but what I can't figure out is how Ford is powering the camera though this cable. The last truck I did 2011 it was a molex connector with separate video and power pins...Thanks again

The cargo camera is like that but the other cameras are all just coax. But considering you can get digital high speed internet over COAX I guess it is possible.

 

[tilefordude]

I did this
https://www.f150gen14.com/forum/threads/mirror-coax-cable-end.17010/#post-337043

 

[Drevnr]

Hi all,

Can anyone help identify the connector below from a 2022? I'm working on a harness for the shifter swap and I'd rather have the receptacle for this plug than splice the wires.

The plug in the picture connects to the column shift gsm. It is labeled connector C2503 for the gsm, C218B for the clockspring, and C3385 for the Multi-Contour Seat Module in the workshop manual. Any help would be greatly appreciated.

Тhis is plug (connector) for HCM module

Sponsored