Fox 2” leveling kit not sitting how I want.

[Smithy5.0]

And one more thing… I have seen several F1 50s that are 4 x 4’s with 2 inch blocks and from the factory they stacked double 1 inch blocks

Yeah I crawled under mine the other day and saw two blocks stacked up but I appreciate it I will get some and put them in.

Sponsored

 

[gijoesgt]

You could try to take one block out on each side and see how you like it. It might work good. About 10 or 15 minutes on each side to try it. Just make sure you have another inch of threads to tighten it back up.

 

[Smithy5.0]

You could try to take one block out on each side and see how you like it. It might work good. About 10 or 15 minutes on each side to try it. Just make sure you have another inch of threads to tighten it back up.

I’m looking at getting one that is 5/8 but it’s 2.5” and my leaf spring is 3” is it a big deal to get a 2.5 or should I get 3”

 

[gijoesgt]

That will be fine as long as the pins line up. How tall is the total height of current block?

 

[Smithy5.0]

That will be fine as long as the pins line up. How tall is the total height of current block?

1.5” tall and 3” wide

Sponsored