Easy accessible parking light tap?

[Wisstx]

Hello all!

I want To tap into the parking lights to provide power to a set of fender badge leds. Accessing the parking bulbs is proving difficult. (Front wheel well peel back get to bulb from in front of wheel method.)

Is there a engine bay fuse that is hot during parking lights? It would be easier than the wheel well access method which is not easy…

(2021 STX super crew halogen lights 2.7.)

Sponsored

 

[AnthemMike]

Peeling back the wheel well liner isn't that difficult if you turn the wheels. But you can also remove the grill which takes less than 15 minutes.

 

[Wisstx]

Thats the long but right way…unless you have a lift. It will make the actual taps super easy. Thanks for the second option!

 

[dm5point0]

Starkey makes a plug that taps directly into the harness. It took me 5 mins to install. I got this one since I have LEDs, but they have a halogen one too.

https://www.starkey-products.com/Ford-F150-Parking-Lights-Adapter-LED-Headlights-2021-2022

 

[Wisstx]

Starkey makes a plug that taps directly into the harness. It took me 5 mins to install. I got this one since I have LEDs, but they have a halogen one too.

https://www.starkey-products.com/Ford-F150-Parking-Lights-Adapter-LED-Headlights-2021-2022

I got it done but man! Thank you for sharing this. In the future it is helpful!!

 

[dnand]

@Wisstx were you able to figure out where to tap into for the rear (if you had LEDs in your rear fender flares?

Sponsored