BobWadd
Well-known member
- Thread starter
- #1
Truck has had this issue since I purchased it used. 2021 3.0 PSD.
If I bring up the DEF Info screen under 'Truck Info' everything is fine as show.
If I set DEF Info as a screen under 'My View', I see the screen with no gauge bar, percentage of any other info.
I imagine this possibly can be corrected with FORScan or it could possibly be an issue with the IPC firmware.
If I bring up the DEF Info screen under 'Truck Info' everything is fine as show.
If I set DEF Info as a screen under 'My View', I see the screen with no gauge bar, percentage of any other info.
I imagine this possibly can be corrected with FORScan or it could possibly be an issue with the IPC firmware.
Sponsored
Last edited:
