Jmwillets
Well-known member
- First Name
- Joshua
- Joined
- Sep 23, 2025
- Threads
- 1
- Messages
- 83
- Reaction score
- 51
- Location
- Central Florida
- Vehicles
- 2025 F-150 STX FX-4
- Occupation
- Safety Manager
Paying more to recieve less....WTF???
Sponsored
Sponsored
Cup holder light installation / media bin light / glove box light / ambient lighting change
- Thread starter JHForman812
- Start date
- Watchers 190
MJS_11
Member
Did you have to order a new bin in able to install the sliding door? I was wanting to do the same to my truck. If so, could you please share a part number? Many thanks.Huuuuggggge shout out to @JHForman812 for helping me on this mod. Very helpful and very easy to put the lightings together.
Additional, I added the media bin sliding door with new bin that have the cutout for the light.
obrien455
Member
If you're talking about the media bin lighting then no. Depending on the year your truck is, you may just have to cut a small hole in the plastic (super easy).
MJS_11
Member
I was more so curious how he got the sliding door cover installed (as shown in attached picture). If it was a simple installation or if he had to change other parts to be able to install it.
TheDudeee
Well-known member
- First Name
- Samad
- Joined
- Mar 22, 2025
- Threads
- 2
- Messages
- 64
- Reaction score
- 99
- Location
- North Dallas, TX
- Vehicles
- 2024 Ford F150 XLT
Yep! The new bin will have two slots on the side and you will also need new top console trim panel to accommodate the sliding door.
ML3Z-1504608-BH (sliding door assembly) (mixed of black vinyl and light oil rubbed bronze) Use the middle number and it will show you in different colors.
ML3Z-1513594-AA (media bin for sliding door and cutout for lighting without wireless charger)
ML3Z-15045A76-BB (console trim panel to accommodate the sliding door)
4x W705093S403 (nuts retainers)
4x W718481S450B (screws)
Optional is the new media bin mat since original mat is smaller. But I didn’t feel like getting new mat.
ML3Z-1504608-BH (sliding door assembly) (mixed of black vinyl and light oil rubbed bronze) Use the middle number and it will show you in different colors.
ML3Z-1513594-AA (media bin for sliding door and cutout for lighting without wireless charger)
ML3Z-15045A76-BB (console trim panel to accommodate the sliding door)
4x W705093S403 (nuts retainers)
4x W718481S450B (screws)
Optional is the new media bin mat since original mat is smaller. But I didn’t feel like getting new mat.
Sponsored
TheDudeee
Well-known member
- First Name
- Samad
- Joined
- Mar 22, 2025
- Threads
- 2
- Messages
- 64
- Reaction score
- 99
- Location
- North Dallas, TX
- Vehicles
- 2024 Ford F150 XLT
I was test fitting before I put all of the panels back together. I was pretty shocked to myself when I opened the box for the new bin and it does have the cutout for the media bin lighting.
MJS_11
Member
If I knew how to add the lighting I would. Honestly baffles me why that wasn’t already just there to begin with. Maybe in the future that’ll be a project to take on.
I was test fitting before I put all of the panels back together. I was pretty shocked to myself when I opened the box for the new bin and it does have the cutout for the media bin lighting.
TheDudeee
Well-known member
- First Name
- Samad
- Joined
- Mar 22, 2025
- Threads
- 2
- Messages
- 64
- Reaction score
- 99
- Location
- North Dallas, TX
- Vehicles
- 2024 Ford F150 XLT
Thank you so so much! I have been doing research galore trying to figure out part numbers and what was needed. One step closer now
No problem at all, glad to help out too. I have the same reaction too on the bin beacuse I thought I would have to make a hole but Ford already took care of that.
There are huge difference on both part numbers. If you already ordered the AB, I would ask for an exchange to BB. AB series is what we have on the XL to XLT. BB is correct beacuse if you look closer to the end, BB have very thin panels that will clear for the door.I’m guessing there’s a potential difference between M
ML3Z-15045A76-AB and ML3Z-15045A76-BB. I ask because I had ordered the “-AB” version…
ML3Z-15045A76-AB
ML3Z-15045A76-BB
Last edited:
Sponsored
MJS_11
Member
Ahhh, ok. Good to know. Yeah, I’ll have to return and exchange then.No problem at all, glad to help out too. I have the same reaction too on the bin beacuse I thought I would have to make a hole but Ford already took care of that.
There are hugh difference on both part numbers. If you already ordered the AB, I would ask for an exchange to BB. AB series is what we have on the XL to XLT. BB is correct beacuse if you look closer to the end, BB have very thin panels that will clear for the door.
ML3Z-15045A76-AB
ML3Z-15045A76-BB
Retired#One
Member
TheDudeee is spot on. I just did this myself on my 2022 XLT. I also confirmed the same console trim panel number from tilefordude. I went ahead and got the new mat. Unfortunately for me I had already ordered a lid off ebay and it wasn't exactly black. It had some copper and gold colors mixed with it. Those colors didn't show in the ebay picture, and it's my fault for not asking the seller. So, I painted my sliding lid a flat black using Duplicolor for Vinyl. The end result was good.
The members of this forum are awesome in helping others out.
I hope to contribute a little when I get my project completely done. I'm going to attempt to add a red LED light behind the door reflector and have it come on when the door is open. I already made, and tested, a circuit using a normally closed solid state relay and current limiting diodes.
The members of this forum are awesome in helping others out.
I hope to contribute a little when I get my project completely done. I'm going to attempt to add a red LED light behind the door reflector and have it come on when the door is open. I already made, and tested, a circuit using a normally closed solid state relay and current limiting diodes.
