HI London, I heard something sound like metal to metal noise mostly running around 5 mph or less off and on the gas. After reading you and others with problem with some noise, I when under my truck to see if I find anything loose? I started on the passenger side first, didn't find anything loose. Drive shaft not loose, spare tire good? But on the driver side, the front leaf spring perch, I noticed that there's a plastic protection around the the sides and bottom of the gas tank. Right next to the leaf spring perch, I started to pushing the plastic around the gas tank, I hear something hitting 12" away towards the top hitting the plastic against tank? Thinking the protection cover plastic was flexing. I found a piece of clear tubing 1 " dia. 5 inches long and put the tubing between the plastic and gas tank right next to the front( lower part) spring perch. Pushed the plastic again not more hitting noise. Test drove for an hour, stopped and go, no more noise. YAY no more cling noise.....I am assuming that the plastic flexed just enough to make a noise against the tank, thinking the noise was metal to metal? I hope you can find your noise issue. I got lucky finding my noise.
What makes this even more frustrating is I can shake the truck side to side jump up and down in the bed and can’t get it to make the noise. Only when driving so it’s hard to pinpoint the location. Can anyone else simulate the noise?
The first picture has the clear hose push in, left of finger is extras, but right of finger about 2 " against plastic and gas tank (need to cut off extras)....I first push there where my finger is, I could hear something hitting on the second picture, towards the top hitting, the straight 1" flat plastic up and down hitting the top when I push the plastic on the lower part. It's a good foot and half where it was hitting. Hope this helps.... I was totally convince it was metal to metal noise that I heard too?
Sorry so many duplicate pictures, don't know why it did that?The first picture has the clear hose push in, left of finger is extras, but right of finger about 2 " against plastic and gas tank (need to cut off extras)....I first push there where my finger is, I could hear something hitting on the second picture, towards the top hitting, the straight 1" flat plastic up and down hitting the top when I push the plastic on the lower part. It's a good foot and half where it was hitting. Hope this helps.... I was totally convince it was metal to metal noise that I heard too?
Thanks Roger! I’ll try to take a look at mine in the next day or so.The first picture has the clear hose push in, left of finger is extras, but right of finger about 2 " against plastic and gas tank (need to cut off extras)....I first push there where my finger is, I could hear something hitting on the second picture, towards the top hitting, the straight 1" flat plastic up and down hitting the top when I push the plastic on the lower part. It's a good foot and half where it was hitting. Hope this helps.... I was totally convince it was metal to metal noise that I heard too?
Same here.
They are telling me when I drop mine off it will be two weeks.
