Blis Calibration?

[{tpc}]

Is there any procedure on how to calibrate the Blis radar?

Let me explain what I am seeing, and I saw it on the last truck as well as the current truck. When I am not towing, blis seems to work fine.

When I am pulling the travel trailer, Blis appears to work correctly on the passenger side mirror. I have a camera on the back of the trailer, and despite a small delay in video, it seems as if Blis picks up approaching vehicles correctly on that side. On the driver side however, it appears to not pick up vehicles until at least half way up the trailer if not more, almost as if it thinks I am not pulling a trailer.

I have set everything up properly, the length is in the system. I've even tried the max length, but it doesn't seem to make a difference.

So is there a procedure to test or calibrate this? Or is this working as intended, maybe because its the driver side you have wouldn't have much of a blind spot?

Like I said, it did it with my 2020 the same way as well. But I never did get around to doing anything about it. Is anyone else noticing the same?

Sponsored

 

[{tpc}]

Anybody? @Jesse-Infotainment ?

 

[Jesse-Infotainment]

There is not a calibration for Bliss. I dont tow at all so I cant confirm normal operation. Ill look into it and see if there is anything else to look at

 

[travisN000]

I haven't towed with my truck in over a year, as the trailer went with the (ex) wife


..but when I did have one, my bliss was like yours; I also tried setting to max distance with no improvement

 

[{tpc}]

I haven't towed with my truck in over a year, as the trailer went with the (ex) wife


..but when I did have one, my bliss was like yours; I also tried setting to max distance with no improvement

Thanks, maybe that is how it is intended to work then?

Sponsored