As Built feature abbreviation codes?

[FI300]

Is there a list of As Built feature abbreviation codes?

Example
IPMA 706-01-01 ModuleFeatureCfg_AH (MFCAH).

What does this stand for? These are related to blue cruise I'm pretty sure.

I found this site but it doesn't have these listed.

https://cyanlabs.net/asbuilt-db/sync4-apim/

Sponsored

 

[KTM753]

Start in the Forscan tutorial thread if you haven't already:

https://www.f150gen14.com/forum/threads/2021-f-150-forscan-list-database-spreadsheet.1578/

The spreadsheet itself has some info in each section pertaining to the acronym but not a spelled out description of each letter every time:

https://bit.ly/3cJnYMS

 

[antho]

ModuleFeatureCfg_AH (MFCAH) Refers to the Auto Hitch feature.

 

[FI300]

I am familiar with Forscan and have read most of the stuff I have seen.

I think I figured out what I was looking for thanks.

 

[FI300]

There is one I can not figure out.

706-38-01 xxx*
There two options for SILC Selected. I know ALCSelected at this location is auto lane change. What is SILC?

 

[Azstroke]

I hate acronyms, sorry, that's all I got.

 

[SilverPigeon]

There is one I can not figure out.
706-38-01 xxx*
There two options for SILC Selected. I know ALCSelected at this location is auto lane change. What is SILC?

There are 5 options for this and every "Customer Setting". These are the 4 personal profiles that can be set up, and the "default" profile (vehicle).

As far as "SILC" is concerned, it's only in a BC1.4 IPMA (according to the sheet). If this is indeed what you have, look in the BC settings wherever they are; it should be another option either at the same or lower level than the other lane change settings. I don't have BC so I don't know the meaning of "SILC".

 

[onlythetoast]

There are 5 options for this and every "Customer Setting". These are the 4 personal profiles that can be set up, and the "default" profile (vehicle).

As far as "SILC" is concerned, it's only in a BC1.4 IPMA (according to the sheet). If this is indeed what you have, look in the BC settings wherever they are; it should be another option either at the same or lower level than the other lane change settings. I don't have BC so I don't know the meaning of "SILC".

SILC = Side Indicator Lane Change? Possibly for BC 1.5.

Sponsored