APIM Unreal Update

[erixgix]

They do like to stir things up, don't they?
Troublemakers. ?

I was thinking more like kids on christmas morning running down to see their new presents…but we can go with your word

I’m grateful that ‘they’ do what they do. We get to watch the Gamma testing and fixes unfold right here, stress free!

Sponsored

 

[RapidRedRick]

I did the unreal APIM update and the 12" screen now has additional depth and clarity. It does not give me the temperature bar, new splash screen or Oil life features. Is this because my sync4 update is too old? Suggestions greatly appreciated.
2021 Job 1 Sync 4 V. 22095 Rev. 421 Ford Power-Up 3.5.2
VIN: 1FTFW1ED6MFB67458

 

[speedracercjr]

I did the unreal APIM update and the 12" screen now has additional depth and clarity. It does not give me the temperature bar, new splash screen or Oil life features. Is this because my sync4 update is too old? Suggestions greatly appreciated.
2021 Job 1 Sync 4 V. 22095 Rev. 421 Ford Power-Up 3.5.2
VIN: 1FTFW1ED6MFB67458

You have to make multiple Forscan edits to get all of those features. They are not turned on automatically.

 

[RapidRedRick]

Thx Speedracercjr, I have OK skills w/ ForScan and using Livnitup's awesome Forscan spreadsheet. I have checked and double checked my edits. Followed all the suggestions on resetting APIM, but only seem to have a sharper more detailed looking screen. I don't have the home screen button in the upper left corner, so maybe I don't have the new unreal screen.

 

[ENG430]

Thx Speedracercjr, I have OK skills w/ ForScan and using Livnitup's awesome Forscan spreadsheet. I have checked and double checked my edits. Followed all the suggestions on resetting APIM, but only seem to have a sharper more detailed looking screen. I don't have the home screen button in the upper left corner, so maybe I don't have the new unreal screen.

Same issue, Did not get the full unreal screen.

 

[antho]

@RapidRedRick
The home button on the top left is only there when you enable the climate bar on the bottom.
Your asbuilt screenshot shows that the Climate bar is not enabled.
7D0-02-02 xxx4-xxxx-xx-- is powerboost,climate bar disabled.
7D0-02-02 xxx6-xxxx-xx-- is powerboost climate bar enabled.

If the 4 value is your factory setting, you need to change it to 6
Your value for Unreal engine is enabled along with the Oil Life.

 

[ENG430]

@RapidRedRick
The home button on the top left is only there when you enable the climate bar on the bottom.
Your asbuilt screenshot shows that the Climate bar is not enabled.
7D0-02-02 xxx4-xxxx-xx-- is powerboost,climate bar disabled.
7D0-02-02 xxx6-xxxx-xx-- is powerboost climate bar enabled.

If the 4 value is your factory setting, you need to change it to 6
Your value for Unreal engine is enabled along with the Oil Life.

Can you please check mine.. Thanks in advance

 

[antho]

Can you please check mine.. Thanks in advance

@ENG430
What am i checking?
Looks like you have climate bar enabled and Unreal engine. What issue are you having?

 

[ENG430]

@ENG430
What am i checking? Looks like you have the unreal engine on. Are you asking about the climate bar?

Yes.
Mine looks like this.
APIM ver. 22192

 

[antho]

Yes.
Mine looks like this.
APIM ver. 22192

@ENG430
What was your factory value at 7D0-02-02 xxx2-xxxx-xx--

 

[ENG430]

@ENG430
What was your factory value at 7D0-02-02 xxx2-xxxx-xx--

Sorry I forget the value.. My mistake

 

[antho]

Sorry I forget the value.. My mistake

I found it. It was 0.
So 2 would be correct.

 

[ENG430]

I found it. It was 0.
So 2 would be correct.

But still Climate Bar is not showed in the screen, I reset the module many times.

 

[antho]

But still Climate Bar is not showed in the screen, I reset the module many times.

I was comparing the screen shot of data you posted and your original data. You have made alot of changes. Did you make a backup of your apim data? May be worth loading the original data and making just these changes to see. Some of these other setting could possibly effect it.

you could also try 7D0-03-01 xxxx-xxxx0A--

 

[ENG430]

I was comparing the screen shot of data you posted and your original data. You have made alot of changes. Did you make a backup of your apim data? May be worth loading the original data and making just these changes to see. Some of these other setting could possibly effect it.

Unfortunately the backup data was saved in the dead laptop.
If there is a way to reload the original as built data or hard reset the apim module?
The changes was made is Glare free, Global windows and all stuff about the unreal theme.

Sponsored