I used those for the doors. Tweeters have a different connector. Crutchfield did not list an adaptor.have you tried crutchfield
https://www.crutchfield.com/p_120725602/Metra-72-5602-Speaker-Wiring-Harness.html?tp=3097
Sure, I can do that, but I just wanted to keep the factor harness 100% intact. Right now I have tinned leads pushed into the factory plug. Kind of sketchy but they won’t pull out, are completely insulated, and zip tied in place. The Infinity Ref tweeters come with cross-overs.Easy just to cut them a couple inches back. Be careful with which tweeter you choose because that stock ones have a resistor that brings the level down. I recommend the alpine type S since it comes with adjustable resistance and won’t sound shitty. One of the best system mods I’ve done.
If Crutchfield does not list an adaptor then they do not have one mass produced yet. I would check with the guys over @SoundsGoodStereoI used those for the doors. Tweeters have a different connector. Crutchfield did not list an adaptor.
Thank you for this, just ordered!Found these guys today & ordered a couple of sets. They look to be an exact match.
https://hoelwiring.com/products/ford-bronco-sport-maverick-speaker-harness
Were you guys able to confirm the adapter from hoelwiring works on the B&O Tweeters?Thank you for this, just ordered!