8/8/2022 Build Week

[rpold150]

I did. I found a similar build on a dealers lot and used that Vin. It had 720 modules?

Good. Then it's definitely interesting that you are missing this.

Sponsored

 

[c35cannon]

I think we should form a small posse and go locate our trucks and place apple airtags in them so we will actually know when they are moving because Ford clearly doesn't know up from down. Let's meet at sundown.

This idea isn't half bad...?

 

[c35cannon]

I couldn't resist it so I contacted Ford chat and they let me know that my ETA for delivery is 9/4 - 9/10 and they didn't see any holds on the truck as of now. Not sure I'll put much stock in this though.

 

[Zstephen]

Been a journey! Ordered March 1st, taking delivery today! Good luck you guys an hope your trucks come soon!

 

[Blackout150]

I couldn't resist it so I contacted Ford chat and they let me know that my ETA for delivery is 9/4 - 9/10 and they didn't see any holds on the truck as of now. Not sure I'll put much stock in this though.

So I had that same conversation with them and got the same dates. Though one person said that it was a delivery estimate and the other said that was a finish of production estimate. So you choose?

 

[SCTYDOG]

Been a journey! Ordered March 1st, taking delivery today! Good luck you guys an hope your trucks come soon!

Hey Zstephen, can I borrow a couple modules? Asking for a friend. ?

 

[c35cannon]

So I had that same conversation with them and got the same dates. Though one person said that it was a delivery estimate and the other said that was a finish of production estimate. So you choose?

Grrrrreeeat so I’ll expect a built email around mid Sept lol

 

[hussar1683]

I couldn't resist it so I contacted Ford chat and they let me know that my ETA for delivery is 9/4 - 9/10 and they didn't see any holds on the truck as of now. Not sure I'll put much stock in this though.

I wouldn’t trust them one bit. Used a chat today and found out my build date is 8/30 with the 8/29 -9/4 delivery to the dealer 600 miles away

 

[D87302]

Ok. Let’s see if we can do a little test to see who has what. This is the modules from the 8/1 build week that someone said were missing.

obviously the first two nobody has because they removed our multicontour seats. The 720 is the instrument panel cluster which I think all of us have and will need. The next ones to me look like they are part of bluecruise. So you guys with blue Cruise check to see if you have some of those? The rest of us might be waiting on our IPC

None of these on my list... 721, 797, 7C5, 7E4
Did get my Tear Tag, and the "In Production" date is now populated on the tracker; activate button in Ford Pass; per Chat, "was produced" and not showing any "holds" or chip shortage issue (I 'll take all that with a grain of salt until...); still waiting and keep looking for "Built" status in the Build Tracker and an email regarding the same from Ford. That is all. Out.

Update:

From “missing Module list” for comparison PLUS more…

My list has no - 721, 732, 746, 750, 761, 765, 775, 792, 797, 7C5, 7C7, 7E4, 7E9 a/o 8/15/2022

721 VDM - Vehicle Dynamics Control Module

732 GSM - Gear Shift Module

746 DCDC - Direct Current/Direct Current Converter Module

750 PACM - Pedestrian Alert Control Module

761 TCCM - Transfer Case Control Module

765 OCS - Occupant Classification System

775 RGTM - Rear Gate Trunk Module

797 SASM - Steering Angle Sensor Module

792 ATCM - All Terrain Control Module

7C5 SECM - Steering Effort Control Module

7C7 ACCM - Air Conditioning Control Module

7E4 BECM - Battery Energy Control Module

7E9 TCM - Transmission Control Module

 

[PaulO]

I’m just hoping we all wake up and check our inboxes and have a built and shipped email…here’s to high hopes.

 

[D87302]

Good news!

I think Brittany is a computer (robot); same bad grammar, same exact message except my ETA date range is August 23-29.

 

[SCTYDOG]

I think Brittany is a computer (robot); same bad grammar, same exact message except my ETA date range is August 23-29.

I think you're right. I found her on FB. Total fembot. Beep beep. Boop beep boop.

 

[D87302]

How many of you refreshing the as built page see captcha letters that mean something to you and you say "THIS IS IT, ALL MY MODULES ARE THERE."?
Only to see same modules without any new modules.

Hard to know that one's build is GTG without knowing exactly which modules the truck is supposed to have. Using other folk's information, and my Do Not Have list keeps growing - disappointing because it's hard to believe a truck is "produced" let alone officially "built" with some of these module descriptions MISSING! WTF! Chat robot starting to look like FOS.

so far, my module update from doing comparisons using others' info (still need to do another Build As refresh)...

From “missing Module list” for comparison PLUS more…

My list has no - 721, 732, 746, 750, 761, 765, 775, 792, 797, 7C5, 7C7, 7E4, 7E9 a/o 8/15/2022

721 VDM - Vehicle Dynamics Control Module

732 GSM - Gear Shift Module

746 DCDC - Direct Current/Direct Current Converter Module

750 PACM - Pedestrian Alert Control Module

761 TCCM - Transfer Case Control Module

765 OCS - Occupant Classification System

775 RGTM - Rear Gate Trunk Module

797 SASM - Steering Angle Sensor Module

792 ATCM - All Terrain Control Module

7C5 SECM - Steering Effort Control Module

7C7 ACCM - Air Conditioning Control Module

7E4 BECM - Battery Energy Control Module

7E9 TCM - Transmission Control Module

 

[D87302]

With the missing modules, I think the dates they are giving us for ETA delivery are actually ETA for the build completion. My dealer.told me yesterday they don't show an ETA yet for delivery. I think we can conclude the trucks probably aren't 100% built. The trucks completed going down the assembly line (produced), but they are not complete (built). That's just my thinking.

I think you are correct!

Edit: on second thought, I do recall now that the ETA I am being given now is the same ETA that was given when I was notified that I was going into production, and that was BEFORE the actual Blend date came... (which would mean that they knew then what would still be needed to complete the build?).

 

[D87302]

Been a journey! Ordered March 1st, taking delivery today! Good luck you guys an hope your trucks come soon!

Congrats. A real beauty! Good Luck!

Sponsored