8/8/2022 Build Week

[SCTYDOG]

Ok so tell me what you think. I had a chat with Ford and this is the reply I got today.

I had also talk to them on Sunday and this is the response I got then.

Dates are the same message is different. I’m assuming that it’s missing parts. I what do you guys think?

With the missing modules, I think the dates they are giving us for ETA delivery are actually ETA for the build completion. My dealer.told me yesterday they don't show an ETA yet for delivery. I think we can conclude the trucks probably aren't 100% built. The trucks completed going down the assembly line (produced), but they are not complete (built). That's just my thinking.

Sponsored

 

[rpold150]

Not sure what I am supposed to have, or not have for my PB Platinum build.

Went through the Module List tab from the FORScan excel file and below is the list I modules I do not see populated in the oredertrack.app for my build.

Module Name - Description	Module Address
ACCM - Air Conditioning Control Module	7C7
ATCM - All Terrain Control Module	792
BECM - Battery Energy Control Module	7E4
DCDC - Direct Current/Direct Current Converter Module	746
DSP - Audio Digital Signal Processing Module	783
GSM - Gear Shift Module	732
IPC - Instrument Panel Cluster	720
OCS - Occupant Classification System	765
PACM - Pedestrian Alert Control Module	750
RGTM - Rear Gate Trunk Module	775
SASM - Steering Angle Sensor Module	797
SCMG - Driver Multi-Contour Seat Module	712
SCMH - Passenger Multi-Contour Seat Module	713
SECM - Steering Effort Control Module	7C5
SODL - Side Obstacle Detection Control Module LH	7C4
SODR - Side Obstacle Detection Control Module RH	7C6
TCCM - Transfer Case Control Module	761
TCM - Transmission Control Module	7E9
VDM - Vehicle Dynamics Control Module	721

I did this same exercise. Then yesterday, I found about 6 platinums that had already been delivered and checked their VINs for modules. Most of these are not included in theirs either. Someone posted a bit earlier looking for module 746. I didn't find any platinums with 746 that had already been delivered.

To know what's missing, you should check modules for similarly configured trucks that have been delivered.

For my platinum 701A, config is in signature, I have these missing that are in the forscan spreadsheet. Through comparisons with other platinum trucks, I've come to the conclusion that I'm not missing any modules because they are missing on the other platinums, or are only for the PB and I have EB.

All Powerboost trucks I compared had 7.2KW generator, so I don't know if the modules are part of PB or 7.2KW. Where the 2nd column is blank, it means my truck doesn't have the module and neither did 6 others I checked that have already been delivered.

ACCM - Air Conditioning Control Module		7C7
ATCM - All Terrain Control Module		792
BECM - Battery Energy Control Module	PB or 7.2KW only	7E4
DCACA - Direct Current/Alternating Current Converter Module A	PB or 7.2KW only	6F1
DCDC - Direct Current/Direct Current Converter Module		746
GSM - Gear Shift Module		732
OCS - Occupant Classification System		765
PACM - Pedestrian Alert Control Module		750
RGTM - Rear Gate Trunk Module		775
SASM - Steering Angle Sensor Module		797
SCMG - Driver Multi-Contour Seat Module	removed	712
SCMH - Passenger Multi-Contour Seat Module	removed	713
SECM - Steering Effort Control Module		7C5
SOBDMC - Secondary On-Board Diagnostic Control Module C	PB or 7.2KW only	7E6
TCCM - Transfer Case Control Module		761
TCM - Transmission Control Module		7E9
VDM - Vehicle Dynamics Control Module	continuous compensating dampening	721

 

[WestlakeHorn]

With the missing modules, I think the dates they are giving us for ETA delivery are actually ETA for the build completion. My dealer.told me yesterday they don't show an ETA yet for delivery. I think we can conclude the trucks probably aren't 100% built. The trucks completed going down the assembly line (produced), but they are not complete (built). That's just my thinking.

I'm fairly certain this is the correct answer. It's happening with the 7/25, 8/1 and 8/8 weeks. Partially built trucks that are likely now sitting in a parking lot waiting for chips to arrive. Fingers crossed that they arrive around the end of the month, so we can move on to the shipping logjam.

 

[rachunter]

So since @Zstephen has been the only one to get a built email out of our build week I’m assuming that every model above that has missing parts. So far all the guys in the next few build weeks if you have a 302A I think you might be OK. But us that have higher end models I think we’re gonna be waiting for a while

My truck is a XLT 302a that has been in production since 7.12.22

 

[Zstephen]

No emails from ford but truck shows final prep on the ford tracker! Picking it up tomorrow!

 

[Moc cock 8]

No emails from ford but truck shows final prep on the ford tracker! Picking it up tomorrow!

Congrats.. doubt anymore of us see movement for a while.

 

[Deleted member 13000]

Blend date was Sunday the 14th but no modules no nothing as of this morning. I swear, my wife and I can make a baby faster than it takes ford to make a truck!

 

[Lockedandloaded08]

Just connected with Ford Chat and they are anticipating my truck being built/completed Aug 29th - Sept 4th now. Wouldn't elaborate whether or not it was due to any chip delays but that has to be issue.

 

[rpold150]

I'm in the 7/25 week and have been sitting in chip-hold. Dealer confirmed chip hold yesterday, and this morning I woke up to Awaiting Shipping. So I hope this means they received plenty of chips and they're working their way though the backlog.

 

[Lazarus11]

I had a 8/1 build week, with a 8/7 blend date. Ford Chat told me it is "Produced", no chip hold with a 04-10 Sept delivery date. The Sales Manager at my Dealer checked his system that also reflects 04-10 Sept delivery and no chip hold. The Ford order tracking site still says "in production". The OrderTrack app says "in production". The Motorcraft module data site reflects that I am missing all of the 720 modules. WTF! I do not know what to believe. I ordered 14 Jan so my patience is becoming questionable. At least FordPass has a Stone Gray Tremor picture above the activate vehicle button!

 

[Beercity]

I wonder if the vehicle data changes when modules are added after tear tag was issued.
Would be nice to know so I wouldn't have to scroll to see if any modules were added since last time I checked.

 

[SCTYDOG]

I think we should form a small posse and go locate our trucks and place apple airtags in them so we will actually know when they are moving because Ford clearly doesn't know up from down. Let's meet at sundown.

 

[rpold150]

The Motorcraft module data site reflects that I am missing all of the 720 modules. WTF!

Is it possible that the Tremor uses a different instrument panel cluster, and therefore does not use the 720 module? I suggest you find some VINs for other Tremors that have been delivered and compare modules with them.

 

[Lazarus11]

I did. I found a similar build on a dealers lot and used that Vin. It had 720 modules?

 

[Blackout150]

Is it possible that the Tremor uses a different instrument panel cluster, and therefore does not use the 720 module? I suggest you find some VINs for other Tremors that have been delivered and compare modules with them.

I think it’s a common module. They have them in the 302A also

Sponsored