360 Camera retrofit & Raptor grille installed

[Dade305]

I’m doing a 360 Camera retrofit on my 2022 Lariat. It will be done in pieces as I get all the parts in. Just got the front completed. Next are the mirrors follows by the wiring & IPMA.

Sponsored

 

[jkosh22]

I’ve been eyeing up the raptor grilles recently and I have the exact same truck. You just confirmed the need for it. good looking truck.

 

[ThumperF150]

I’d like to do the 360 upgrade on my 24 but it’s probably above my skill level. I know a guy but he is in TX and I’m in CA.

 

[jkosh22]

I have the 360 cameras on my truck. To be honest, it’s not worth the upgrade if your truck doesn’t come with it. I tow a camper in the summer and occasional enclosed trailers. Only camera I use is the back up cam. Otherwise I don’t see a huge need. But y’all may use your trucks differently than I do.

 

[hpwjr]

As you progress, can you register part numbers and cost?

 

[Dade305]

I’d like to do the 360 upgrade on my 24 but it’s probably above my skill level. I know a guy but he is in TX and I’m in CA.

It’s really not that hard. The only thing that I can see being intimidating is transferring software build from your truck to the new ipma using forscan or you can simply buy one from @Jesse-Infotainment who will build
It for your specific truck. I’ll update this thread as I go and will give you a final verdict.

 

[Dade305]

I’ve been eyeing up the raptor grilles recently and I have the exact same truck. You just confirmed the need for it. good looking truck.

I got this from rockeeauto for $209

I have the 360 cameras on my truck. To be honest, it’s not worth the upgrade if your truck doesn’t come with it. I tow a camper in the summer and occasional enclosed trailers. Only camera I use is the back up cam. Otherwise I don’t see a huge need. But y’all may use your trucks differently than I do.

Probaly not since I’m not towing anything. I just wanted it just to have it. In case I ever decide to sell the truck.

 

[jkosh22]

I got this from rockeeauto for $209

Probaly not since I’m not towing anything. I just wanted it just to have it. In case I ever decide to sell the truck.

Wife asked for a Christmas list and the grille was #1 on it. I know what you mean, I bought my truck used and wanted all the gadgets knowing damn well I didn’t need them all.

 

[ThumperF150]

It’s really not that hard. The only thing that I can see being intimidating is transferring software build from your truck to the new ipma using forscan or you can simply buy one from @Jesse-Infotainment who will build
It for your specific truck. I’ll update this thread as I go and will give you a final verdict.

You lost me at “transferring software.”

 

[pelon222]

There is a thread with all the instructions for this retrofit

 

[ThumperF150]

There is a thread with all the instructions for this retrofit

I’d need to read and re-read that thread multiple times before I order parts

 

[Dade305]

You lost me at “transferring software.”

Copying your truck build into the new IPMA and then enabling the 360 than calibrating it. Think of it like copying a folder from one hard drive into another.

 

[TremorDave]

I’m not big on the raptor grill on an actual raptor, but seeing it side-by-side with your stock grill makes me love the raptor grill on the standard f150. Nice

 

[jkosh22]

I’m not big on the raptor grill on an actual raptor, but seeing it side-by-side with your stock grill makes me love the raptor grill on the standard f150. Nice

I think it fits this body style better than any other previous generation.

Sponsored