Sponsored
Graygoose2021
Well-known member
Xl and 34s
Graygoose2021
Well-known member
yes leveled, 20x9 with +20, tires are Nitto Ridge Grappler, 295/60/20
Sponsored
ateurtrk79
Active member
Did you have to do any cutting or trimming? Do you experience any rubbing? Also, what leveling kit do you have?
Graygoose2021
Well-known member
sorry for delay, holiday weekend.
Stage 3 leveling kit, only had to trim about 3" off rear crashbar, behind front tires.
Stage 3 leveling kit, only had to trim about 3" off rear crashbar, behind front tires.
Vin
Well-known member
I know this is an old post, but I wanted to check on something. It seems like some are fitting similar sized tires without trimming and certainly not cutting the crash bars. Is it your wheel offset causing the rubbing? How much lift (level) did you put on the front?
Truck looks great by the way. I've got 35x11.5s on the way to go on my stock 20" wheels and your crash bar trimming scared me a bit. I was under the impression that they should fit no problem.
Graygoose2021
Well-known member
The wheels are 20x9 with +20, stocks are like +44?
But it barely hit on drivers side, only in reverse at full lock. So just trimmed both back, no issues anymore.
But it barely hit on drivers side, only in reverse at full lock. So just trimmed both back, no issues anymore.
Sponsored
Graygoose2021
Well-known member
Leveled only.
Graygoose2021
Well-known member
2.3" sorry!
smoothoper2000
Member
- First Name
- Harold
- Joined
- May 19, 2020
- Threads
- 0
- Messages
- 24
- Reaction score
- 10
- Location
- Sacramento
- Vehicles
- 2016 150 Platinum. 2022 Platinum 3.5 6 1/2
- Occupation
- Retired Foreman utility company
Do you have some better side views I like to level mine but I’m not sure I want to get the rear in just brought down I will need the front raised
Graygoose2021
Well-known member
side after leveled
Sponsored
Similar threads
