2025 f150 tremor blocks

[dora&boots]

I just got my leaf springs replaced at the dealership. I’m wondering about the blocks between the leaf and the axle. The orientation is different on the driver’s side and the passenger’s side. Is this normal?

Sponsored

 

[TheGoatman]

I just got my leaf springs replaced at the dealership. I’m wondering about the blocks between the leaf and the axle. The orientation is different on the driver’s side and the passenger’s side. Is this normal?

I have to check but i thought hole should face back

 

[dora&boots]

Yeah that is what i thought too. Driver side, hole is facing back. Passenger side, hole is facing front.

 

[TheGoatman]

I cant remember if theyre tapered

 

[dora&boots]

I will wait for someone here to confirm that. If it is then i would have to correct this right?

 

[TheGoatman]

U can measure each end to see if theyre different. Its getting cold here right now but saw youre in canada so that cant be better

 

[dora&boots]

That is right. It’s actually kind of cold here too today. You mean measure the height on each side?

 

[TheGoatman]

That is right. It’s actually kind of cold here too today. You mean measure the height on each side?

Get a tape measure and measure the height of the side with the hole and the opposite closed side.

 

[Confused]

On mine both holes are facing the rear. I don't know if they are tapered.

 

[FaaWrenchBndr]

Not sure if it really helps but I know that the F250 Tremor’s rear blocks are tapered

 

[l1tech]

The blocks are tapered and the hole is supposed to face the rear. Someone EFFED up!!

 

[Bryan Simon]

My 21 SuperCab, 8' had arrow cast int the block.
Not sure about the shorter than 164"-157" WB trucks tho.

 

[Blown F-150]

The blocks have a slight taper and the hole should be at the rear

Sponsored