staying_tuned
Well-known member
- Thread starter
- #1
Hey folks, it seems we are pretty limited from a gauge pod standpoint so I wanted to list what I've found and see if anyone else is aware of anything out there. I'm looking for a classic a-pillar, steering console or even top center storage location pod. I've seen a GT500 pod retrofit but nothing like a basic molded pillar pod out there. I don't want to bolt on anything universal.
I do have an SCT X4 capable of displaying a few metrics but its a battery drain and cumbersome. Here is all I've come up with which could be categorized as seamless OEM-like from a design standpoint. I'd love to run IAT, EGT and boost on my supercharged 5.0 via an AeroForce or any quality multi-gauge with a standard 52mm form factor.
P3 Vent Gauge - Great, I ran this in 2 vehicles previously and loved them but its gotten a bit expensive IMO by the time you factor in the additional analog boost sensor and vent.
A/C Vent Insert - Seems brittle and the finish is rough
Anything else out there?
I do have an SCT X4 capable of displaying a few metrics but its a battery drain and cumbersome. Here is all I've come up with which could be categorized as seamless OEM-like from a design standpoint. I'd love to run IAT, EGT and boost on my supercharged 5.0 via an AeroForce or any quality multi-gauge with a standard 52mm form factor.
P3 Vent Gauge - Great, I ran this in 2 vehicles previously and loved them but its gotten a bit expensive IMO by the time you factor in the additional analog boost sensor and vent.
A/C Vent Insert - Seems brittle and the finish is rough
Anything else out there?
Sponsored
Last edited:
