2021+ F-150 FORScan List / Database / Spreadsheet

[Kanuck]

[

Is there an address for eliminating the time delay that exists when closing a door to being able to lock it by pressing the button on the door handle? This is a pet peeve of mine; a quick run through of the the DDM/PDM spreadsheet didn’t reveal anything obvious.

From what I understand and read on this forum - and I maybe wrong (for the first time in my life again) - it is because of the battery SOC that causes the delay. I remember seeing that a member changed his battery and that delay went away.

Sponsored

 

[AussieSteveGuy]

are these in the owners manual? i know about the lock (bottom two buttons) but i've been told you can release the tail gate and honestly have never looked into it. i usually unlock the truck open the door and hit the button or just open it.

While we're on the topic of "tricks" our trucks can do, one I learned recently that I love and use often is to push the '5' button (middle one) on the door keypad immediately after entering your unlock code to drop the tailgate

 

[nitrobass24]

On my Powerboost the Speed PID in the truck indicates a slower speed than the speedometer on the dash.

Interestingly, Bluecruise is limited to 80mph by code, and yet I can lock it in at 81mph indicted (on speedometer).
Since the speed PID is at a fraction below 80mph still, that would indicate the limit-code is not using the dashboard speed.
At 82 indicated, the PID finally exceeds 80. It's 80.xx, and Bluecruise disables.

On I-10 between San Antonio and Houston, I need a hack to increase the Bluecruise limit about 2-3mph to match the flow of traffic.

You could make your tires "smaller" in Forscan. I've considered this as well since the speed limit on 130 Toll is 80-85mph.

 

[Kanuck]

https://www.f150gen14.com/forum/thr...atabase-spreadsheet.1578/page-178#post-395111

The .967 multiplier is needed because rolling circumference is less than tire circumference as tire squishes down.

I did the calibration today - worked out to be .963......depending on how accurate my app is. But time will tell and I can change it if needed.

 

[Hans Moleman]

I have. 2023 PB and my transmission is experiencing some harshness during down shifts so I want to clear adaptive transmission tables using Forscan but I have a few questions:

1. If I clear the adaptive transmission tables using Forscan, will the dealer be able to tell I did it? If this doesn’t work and I still have to bring it to the dealer to check out I don’t them to give me grief about it.

2. Should I also clear the PCM?

 

[backcountryplatinum]

Hi folks- 2022 powerboost I adjusted tire size the “easy” way by manually inserting my new circumference in MM. I didn’t write down the original value (2500 something). Is there a way to find out the original value? Is there a way to get the BCM back to original? I didn’t save anything as I haven’t modded anything before and you can’t save easy mode. Rookie move.

thanks!

 

[Big Dog Daddy]

Hi folks- 2022 powerboost I adjusted tire size the “easy” way by manually inserting my new circumference in MM. I didn’t write down the original value (2500 something). Is there a way to find out the original value? Is there a way to get the BCM back to original? I didn’t save anything as I haven’t modded anything before and you can’t save easy mode. Rookie move.

thanks!

If you've just made the change and it hasn't updated on the Ford cloud yet, you can still download your original As-Built information and find the original values in it.

Index - FordServiceInfo.Com (motorcraftservice.com)

 

[backcountryplatinum]

If you've just made the change and it hasn't updated on the Ford cloud yet, you can still download your original As-Built information and find the original values in it.

Index - FordServiceInfo.Com (motorcraftservice.com)

Was done last Monday unfortunately. I hadn’t driven it much since.
Any Plan B?

 

[Kanuck]

Hi folks- 2022 powerboost I adjusted tire size the “easy” way by manually inserting my new circumference in MM. I didn’t write down the original value (2500 something). Is there a way to find out the original value? Is there a way to get the BCM back to original? I didn’t save anything as I haven’t modded anything before and you can’t save easy mode. Rookie move.

thanks!

What tires are original? My General Grabbers 265 70 R18... 2571 mm factory setting

725-15-01 xxxx xxxx 09--
726-15-02 D5xx xx--

 

[backcountryplatinum]

What tires are original? My General Grabbers 265 70 R18... 2571 mm factory setting

I had the 20s. 275/60/20.

that sounds eerily close to what mine was set at.

again, if anybody has a way to revert to factory BCM let me know! Can the dealership not flash it?

 

[Kanuck]

I had the 20s. 275/60/20.

that sounds eerily close to what mine was set at.

again, if anybody has a way to revert to factory BCM let me know! Can the dealership not flash it?

Tire Comparison shows them just half an inch taller

 

[Kanuck]

Use the Easy method and enter 2571. Can not remember what the setting is called but it is at the start of the "R"'s lol

 

[2022Bruce_L]

What happened to the Ford Performance / Raptor splash screen? I no longer see it listed.

 

[crazywayne311]

While we're on the topic of "tricks" our trucks can do, one I learned recently that I love and use often is to push the '5' button (middle one) on the door keypad immediately after entering your unlock code to drop the tailgate

this did not work on my truck

 

[towpro]

in the sync settings you can turn "camera delay" on or off, but can I extend the delay one time in forscan?
Mine shuts off real fast in my 2023.

Sponsored