2021+ F-150 FORScan List / Database / Spreadsheet

[THEREED]

https://www.motorcraftservice.com/AsBuilt

Just write your vin number you will get your original as built files.

Thank you!

Sponsored

 

[ENG430]

Not for 21. When you change it changes online. These trucks self report. The only module that may not is the BCM all others do. Some of the other vehicles will also with sync 3 if they are on Wi-Fi or are connected.

Because I don't have wifi in my lariat 502a.
as uou said alot of features disabled because it is Kuwait build.
Untill now I don't have 360 cams on speed. Only Bed, Hitch an Rear cam on speed. ;(

 

[Keshka]

Sounds like Ford was listening and made it possible to save your vehicle modes (steering, suspension, exhaust, auto on/off) for the 2022MY. I believe that is the only major addition to the 2022 over the 2021. This feature fixes an annoyance in the 21's because the modes had to be set every time you started your Raptor.

Ford added a Raptor button to the steering wheel that opens a new menu on the dash (MyMode Settings).

Looks like a great mod for Forscan hacks to tackle for the 2021 Raptors!

 

[Briansk12]

So I got Power-up 2.5.1 yesterday. I now have camera in motion for Rear Cam, Bed Cam, and Hitch cam all in full screen. I also have the ability to see the bed cam in the side screen. These did not work previously. Before 2.5.1 I could get camera in motion for the hitch and bed cam with the 360 view. That is gone now. Mine in a Job 1 truck built in May 2021. Pushing the video button turns the camera on and then you can select which of the 3 you want to view. Are the 3 full screen views what Job 2 trucks have had all along? if so looks like us Job 1 guys are going to be brought up to date.

 

[93dpscoupe]

Sounds like Ford was listening and made it possible to save your vehicle modes (steering, suspension, exhaust, auto on/off) for the 2022MY. I believe that is the only major addition to the 2022 over the 2021. This feature fixes an annoyance in the 21's because the modes had to be set every time you started your Raptor.

Ford added a Raptor button to the steering wheel that opens a new menu on the dash (MyMode Settings).

Looks like a great mod for Forscan hacks to tackle for the 2021 Raptors!

Man, that would be nice to adapt to the regular F150 as well! Part # for the raptor steering wheel is ML3Z-3600-AB. I'd volunteer as tribute, but I probably wont have my truck until August.

 

[daemonic3]

So I got Power-up 2.5.1 yesterday. I now have camera in motion for Rear Cam, Bed Cam, and Hitch cam all in full screen. I also have the ability to see the bed cam in the side screen. These did not work previously. Before 2.5.1 I could get camera in motion for the hitch and bed cam with the 360 view. That is gone now. Mine in a Job 1 truck built in May 2021. Pushing the video button turns the camera on and then you can select which of the 3 you want to view. Are the 3 full screen views what Job 2 trucks have had all along? if so looks like us Job 1 guys are going to be brought up to date.

Interesting! Did you have the Forscan hacks before the update or did the update just fully enable everything for you?

I'm also interested in the default Job2 behavior. I enabled the in motion for my Job1 and I do love the bed cam + small 360 card view, so not sure how I'd feel about losing the 360 card. And you said the bed cam card works now? Because that would also be fantastic so I can check on my dogs without a button press.

 

[Briansk12]

I had the Forscan settings already in there. I added the side screen after I saw that camera views were working to see if it would work also.

 

[Platinum Peasant]

So I got Power-up 2.5.1 yesterday. I now have camera in motion for Rear Cam, Bed Cam, and Hitch cam all in full screen. I also have the ability to see the bed cam in the side screen. These did not work previously. Before 2.5.1 I could get camera in motion for the hitch and bed cam with the 360 view. That is gone now. Mine in a Job 1 truck built in May 2021. Pushing the video button turns the camera on and then you can select which of the 3 you want to view. Are the 3 full screen views what Job 2 trucks have had all along? if so looks like us Job 1 guys are going to be brought up to date.

This is literally the best message I have read in my entire F150 ownership. I am dying for some updates ???

 

[Ruffiano99]

Has anyone figured out how to deactivate the Active Air Dam feature in Forscan so you dont end up with a bunch of DTCs. Im disconnecting and getting rid of mine, ive had enough of it getting stuck.

 

[jperry5835]

So I got Power-up 2.5.1 yesterday. I now have camera in motion for Rear Cam, Bed Cam, and Hitch cam all in full screen. I also have the ability to see the bed cam in the side screen. These did not work previously. Before 2.5.1 I could get camera in motion for the hitch and bed cam with the 360 view. That is gone now. Mine in a Job 1 truck built in May 2021. Pushing the video button turns the camera on and then you can select which of the 3 you want to view. Are the 3 full screen views what Job 2 trucks have had all along? if so looks like us Job 1 guys are going to be brought up to date.

This is good news, maybe now they will finally start getting Blue Cruise out to us Job 1 people,

 

[scott011422]

Is there away through Forscan to enable nav while driving? I see there is this 170 dollar module I can plug in that will do this. But can it be accomplished through Forscan??

https://www.4dtech.com/canopener-motion-unlock-for-sync-equipped-vehicles/

 

[Bob_Mac]

Is there away through Forscan to enable nav while driving? I see there is this 170 dollar module I can plug in that will do this. But can it be accomplished through Forscan??

https://www.4dtech.com/canopener-motion-unlock-for-sync-equipped-vehicles/

Don't you have Android Auto or CarPlay? If so, I would save your money and use Google Maps...

 

[scott011422]

I haven't received my truck yet. So Im assuming the CarPlay would have the same restriction?

 

[Ajzride]

I haven't received my truck yet. So Im assuming the CarPlay would have the same restriction?

It does not.

 

[SALVAGE]

This is good news, maybe now they will finally start getting Blue Cruise out to us Job 1 people,

Can't wait for it for my 21 platinum o just got a 22 f150 and I love the 360 in motion on it it even let's you see the camera on the shortcut section of the screen

Sponsored