Search results

Hi got mine off ebay. All so check car-part.com. https://www.lethalperformance.com/lethal-performance-painted-door-handles-2021-f-150.html

What I did was find a used truck that has what u want and get the vin number and go to a ford parts department and get too look up what you want.

Hi I bought some lariat crew cab seat cover take offs and only used the two front for my single cab. I still have the back never used. They came out of a 21 or 22 lariat sport.

I did the oem ford one on my 22xlt Rc . Works great and hidden just like the others said.

Banks makes one to. You could look into it. The banks has normal reverse where if you have pedal commander in race mode you get race mode in reverse.

I have a 22 xlt rc 5.0 and mine does same thing. You could be on 1 then it just to blow a ton of air. And why if you use the remote start once you get in and turn the key does the ac have to quit blowing for like at least 1 minute or so.

These trucks Rcsb have come a long way. Now it’s not as nice as a 4 door but it’s close. seats are not bad and there is room behind the seats too. Mine is a 22 xlt 5.0 4x4 Rcsb. 2wd would probably ride a little better but I bet it would be marginal.

Nice write up I did my two door with those to. I got like $175. In mine. I bet your fingers hurt after all that Mine did and I just did the front two seats..

I had one paint matched and transferred everything from a chrome one. I transferred 1 little clip at a time so I knew where they go cause there are a lot. Like about 2 hours worth. Take some pictures before you start pulling stuff off the old one. I put down a couple of blankets to keep from...

You can do this on the ground it just takes longer. Front one side at a time. Then lift Both sides of the back. Don’t Torq the final Spec til your dune and the truck all together dune and on the ground with all the weight on it. Ramps, a couple of jacks and 4 jack stands a few long crow bars...

Hi I have IHC 3/5 on mine with no caster bolts and 10,000 miles on it since lowerd no problems still hold the road straight tires look fine. I’ve had them rotated and balanced twice as I do them every 5000 miles. I haven’t noticed any rubbing Or drive line issues. Mine is a 22 xlt 5.0 3’73 4x4...

Hi mine is a 22 XLT mid package 4x4 5.0 3’73 geared. IHC 3/5 ride quality kit with helper bags. 22” Forge Star wheels with nitto 420 v’s . T

Hi I have a 3/5 IHC Ride quality kit on mine. Mine is 4x4 5.0 The hight is just right when you get in and out with out having to jump up in or lower your self down. I have there helper bags to so I can haul mulch or tow somthing with out it squatting.. if you can get the front control arms for...

Watch the part of this video where he does it by hand. This guy is an industry leader in this stuff. If you do decide to do this all ways start with the least aggressive way then work your way up.

I like the color combo. I’ve got the black ones. Put her on the ground.

I took my time . Probably about 3 hours to go slow and work and then rewatch video each step. For me i just wanted a nice oem higher trim look and didn’t want to spend the money. I would price around to see how much they would charge to install these before i bought them. All so check on...

There is a ton of them on there. I think there coming off those new conversion trucks like the Shelby ,Saleen, Roush and others. The ones I got were brand new. Make sure to read the description.

Just doing the oem paint match bumper..

Check eBay they have oem new factory take offs from lariat from $169 to $259. There are no hog rings on these new trucks they use Velcro zippers and tabs. There are a lot of good videos out there on how to swap them out. This is the one I used when swapping mine. Just pull ,push and spread it...

No the stitches are light gray which match the xlt steering wheel. The piping is that deep burgundy but I died it black. I just searched oem leather seat covers. I got a whole crew cab and only used the fronts. These are new take offs. I wasn’t going to pay $900 for two front seats.