Raptor Headlights on Lariat/Platinum?

[beo_tom]

@beo_tom
Sorry, I forgot to post this schematic the other day. I only show the effected wires, and not the pass-thru wires.

?????? That's what I'm talking about!

Sponsored

 

[beo_tom]

Since i was not going to take the 14-16 week lead time from Digikey, i paid through the nose somewhere else. Should have them both by 3/7

 

[beo_tom]

@beaver24 - have you had a chance to take a nighttime vid of the headlight operating? Its been cold by me too and going out to take a video lately sounds terrible so I completely understand if not.

 

[beaver24]

Not at night, but headlights on. Camera refresh rate make it look like it's glitching, but obviously it's not. You can see where the amber goes dim and bright.

 

[beo_tom]

Not at night, but headlights on. Camera refresh rate make it look like it's glitching, but obviously it's not. You can see where the amber goes dim and bright.

Absolutely beautiful! Thanks for this

 

[beaver24]

Since i was not going to take the 14-16 week lead time from Digikey, i paid through the nose somewhere else. Should have them both by 3/7

That sucks. Did you get the Deutsch male 4pin DT connectors, DT terminals, Molex terminals, TXL wire, etc? Some crimpers as well.

If not, DM me.

edit: Strange, I see 93 in stock of #AT04-4P-RT01 at Digikey. 14week leadtime is if they are out of stock.

 

[beo_tom]

That sucks. Did you get the Deutsch male 4pin DT connector, DT terminals, Molex terminals, TXL wire, etc?

I not, DM me.

All I needed was the 4 pin molded deutch connector. I decided to modify my current harness. 41 dollars each for those diodes ? I also have an assortment of deutch and molex plugs and terminals, also wire for days. I'll be set once they arrive.

 

[beaver24]

All I needed was the 4 pin molded deutch connector. I decided to modify my current harness. 41 dollars each for those diodes ? I also have an assortment of deutch and molex plugs and terminals, also wire for days. I'll be set once they arrive.

Dang, those should be way cheaper! Sorry to hear that. Well, at least you'll have it done here soon.

Digikey shows 93 in stock of those #AT04-4P-RT01, if it's not to late to cancel the other order.

 

[beaver24]

Got the fog lights installed. Diodes between turn and drl on those worked too.

 

[beo_tom]

Got the fog lights installed. Diodes between turn and drl on those worked too.

I'll join the full amber DRL gang...soon!

 

[DD519]

Has anyone tried this for 2024/25 with Raptor LED projector headlights?

 

[beo_tom]

That sucks. Did you get the Deutsch male 4pin DT connectors, DT terminals, Molex terminals, TXL wire, etc? Some crimpers as well.

If not, DM me.

edit: Strange, I see 93 in stock of #AT04-4P-RT01 at Digikey. 14week leadtime is if they are out of stock.

dang, i must have just missed it

 

[beo_tom]

Almost there! Got the harnesses done. Lights and FORscan tomorrow

 

[beo_tom]

I did it! @beaver24 Major props to you my friend. Didn't expect to get it on my first try after following your instructions

 

[beaver24]

I did it! @beaver24 Major props to you my friend. Didn't expect to get it on my first try after following your instructions

Nice! That's awesome!

Sponsored