2021+ F-150 FORScan List / Database / Spreadsheet

[antho]

Info page while running.

@Tungy01 Is there a question or ???

Sponsored

 

[farmtruckman]

I tried the feature below but it wasn't successful. My value was 0 and I changed it to 1, then reset the APIM but unfortunately no change. What am I missing please? My Sync is on v24022 for a 2021 Raptor.

Removes black box on reverse camera that says "full view not available"

APIM

7D0-02-02

xxx*

xxxx

xx--

If your current value is 0 then change to 1, 2 change to 3, 4 change to 5, 6 change to 7 Note: reset APIM after the change

Screenshot of APIM before the change:

Screenshot of APIM (where value has been changed from 0 to 1):

Box still seen after making the change:

 

[SilverPigeon]

@mmir try enabling the cameras at speed, first 3 lines of the common tab.

 

[farmtruckman]

@silverpige

@mmir try enabling the cameras at speed, first 3 lines of the common tab.

@SilverPigeon cheers mate, I did those steps too but no luck. When I press the camera button, this dialog box still stays open. For my understanding, is the expectation that the dialog box will be removed only when I move to R gear or even when I press the camera button while being in D?

From IPMA with the change (706-02-02):

From APIM with the change 7D0-01-01 and 7D0-01-04:

 

[SilverPigeon]

@mmir:
1. 2021 IPMA ?
2. 360 cameras ?

 

[farmtruckman]

Another question unrelated to my earlier post, checking if it is a FORScan feature that can be enabled or it is a limitation on my hardware:

My truck has the below screen with the time, phone list and the outside temperature in the top bar:

I have seen many screens have a few extra features/options on them, as you can see below:

Took some screenshots of a few posts from many threads where the top bar had these extra bits.

Appreciate the help

 

[farmtruckman]

@mmir:
1. 2021 IPMA ?
2. 360 cameras ?

@SilverPigeon thanks for your reply.
1. The truck is a 2021 Raptor, so yes 2021 IPMA I am guessing.
2. No, only reverse camera.

 

[SilverPigeon]

@mmir I don't know why in your IPMA you have 00 here, it says it should be 01:

706-02-02

xxxx

xx**

xx--

FeatureCfg_DPAC_OffRoadVersion: 00=Disabled 01=Raptor 02=CX430 03=U725

 

[SilverPigeon]

Another question unrelated to my earlier post, checking if it is a FORScan feature that can be enabled or it is a limitation on my hardware:

My truck has the below screen with the time, phone list and the outside temperature in the top bar:

I have seen many screens have a few extra features/options on them, as you can see below:

Took some screenshots of a few posts from many threads where the top bar had these extra bits.

Appreciate the help

Status Bar Temperature

7D0-02-02

*xxx

xxxx

xx--

Change your 0 to 4

 

[SilverPigeon]

There seem to me to be other odd settings in your IPMA. I hesitate to change them as they don't make sense to me from the '21 IPMA tab. Whether or not it's contributing to the black box issue is not clear. Maybe someone with more experience can assist.

 

[farmtruckman]

Status Bar Temperature

7D0-02-02

*xxx

xxxx

xx--

Change your 0 to 4

@SilverPigeon No luck mate, I tried changing it from 0 to 4 and then as a second attempt from 0 to C, reset the APIM by pressing the 2 buttons (power button and next track) but no luck.

APIM with change to 4:

APIM with change to C:

How the screen looks like after both attempted changes:

 

[farmtruckman]

There seem to me to be other odd settings in your IPMA. I hesitate to change them as they don't make sense to me from the '21 IPMA tab. Whether or not it's contributing to the black box issue is not clear. Maybe someone with more experience can assist.

No problem mate, let's see if someone else can chime in as well. Thanks for your help.

 

[12Lariat21]

I went to re-enable the fake engine noise in my 21 ecoboost, and apparently I didn't save the ACM as-built, or overwrote the original, either way. Would anyone have any idea what it could have been, or have any definitions of what these mean....

2021 Lariat 502A, optioned out with nearly everything...no deletes of any kind.
I did try to change it to a '1' but it's been so long I don't know if did anything or not...all else fails I'll just try them all and see what happens but, figured it'd be worth checking with ya'll.

 

[EcoBeastCA]

I've submitted my info for a Forscan key twice already and never gotten a response back. Is there a limit on how many times you can do this or something?

 

[Bob Violence]

I've submitted my info for a Forscan key twice already and never gotten a response back. Is there a limit on how many times you can do this or something?

I had to get a new key a few days ago to re-activate Forscan. FYI, they didn't sent me anything via email; it just appears on their webpage after you hit submit (the one that says it may take 30 mins or so). Had to hit refresh a few times, but within 30 mins, that page updated with the new info.

Sponsored