2021+ F-150 FORScan List / Database / Spreadsheet

[powerboatr]

Bounces between 8th and 9th. Towing about 6,500 lbs, carrying 4 passengers and the bed full of luggage and gear. ?

plus a few hundred in fish on way back

i

Sponsored

 

[rugedraw]

I think Jesse figured it out. You gotta use hex-to-dec to figure out the value. 014B translates to 331. So 0163 would be 355. I already know from another VIN that a truck with 3.73 will have have 0175 in that block.

Edit: Confirmed. Came across a VIN of a truck with 3.55 gears and the value is indeed 0163 on that truck.

 

[powerboatr]

you mentioned 3.73 might be a bit fast on engine
i had a 16 expedition EL 4x4 with 3.73 at 77 it was running a bit over 2100 rpm
smooth as silk on the eco boost and 6spd

 

[rugedraw]

you mentioned 3.73 might be a bit fast on engine
i had a 16 expedition EL 4x4 with 3.73 at 77 it was running a bit over 2100 rpm
smooth as silk on the eco boost and 6spd

I'm gong to do my diligence and research before deciding which gear ratio I want to go with. All I can tell you for sure is that the 3.31's will not last much longer on my truck.

 

[powerboatr]

I'm gong to do my diligence and research before deciding which gear ratio I want to go with. All I can tell you for sure is that the 3.31's will not last much longer on my truck.

i thought all powerboost trucks were 3.73 . i have only ever run across PB with max tow ,
see i learned something new today
also the 373 in the expedition never broke a bolt ? ? ?

 

[imnuts]

i thought all powerboost trucks were 3.73 . i have only ever run across PB with max tow ,
see i learned something new today
also the 373 in the expedition never broke a bolt ? ? ?

4×2 Powerboost trucks are 3.55 and 4×4 PBs are 3.73.

 

[powerboatr]

4×2 Powerboost trucks are 3.55 and 4×4 PBs are 3.73.

thanks

 

[TheCyborgSlayer]

Can someone tell me the coding for increasing the lane change blinker count. My understanding was 724-01-01 - xxxx xAxx xx should have given me five blinks. It did not. It went down to two. My initial letter was a C. So I tried G and it gave me around ten-twelve blinks. I went back to C and I still have at least 10 blinks. Hoping someone can tell me the coding for five or six blinks so I don’t have to reload the as built and start over since I added the heated steering wheel back recently.

 

[SouthernGuy]

To fix the blink count it's easier not to use the As-Built - the one with wording for changes.
It's the SCCM

 

[jwander92]

Message me your VIN and I'll give you some values to try

Did you ever get your PTBA working? I have power to the PTBA knob in my truck because it has a back light, but pressing the button in does nothing. Hoping there is something I can do in forscan.

 

[scott011422]

I don't know if anyone found this yet, was looking for something else and came across this for those interested.

HeadlampPosAtIgnOn_Cfg (HPAIOC)
726-74-01 xxx* xxxx xx--
0 = HPAIOC AUTO 1 = HPAIOC LAST_KNOWN

 

[Nightshade]

I don't know if anyone found this yet, was looking for something else and came across this for those interested.

HeadlampPosAtIgnOn_Cfg (HPAIOC)
726-74-01 xxx* xxxx xx--
0 = HPAIOC AUTO 1 = HPAIOC LAST_KNOWN

It’s on the FORScan spreadsheet; line 31.

 

[scott011422]

It’s on the FORScan spreadsheet; line 31.

Lol! Not sure how I missed that!

 

[DK4]

I don't know if anyone found this yet, was looking for something else and came across this for those interested.

HeadlampPosAtIgnOn_Cfg (HPAIOC)
726-74-01 xxx* xxxx xx--
0 = HPAIOC AUTO 1 = HPAIOC LAST_KNOWN

What does this do?

 

[scott011422]

What does this do?

Some people hate that the headlights automatically go back into auto mode. This doesn’t. Leaves them where you had them. So if you had them off, they will be off on your next ignition cycle.

Sponsored