Power-Up 4.2.1. OTA software update installed today

[m_bt54]

I keep checking back (an embarrassing number of times each day!) hoping to see a 21 owner chiming in saying they received the update but still nothing

Sponsored

 

[Kanuck]

Got 4.2.2

Are you at 23031 Rev 713? My understanding that was for the Mach-E.

 

[XLT22]

Has the balance/fade misalignment when using the Unreal Engine been fixed?

Still the same issue. Digging around there’s been more graphic harmonization with the Lightning/MME though.

 

[JJSnell]

Soooo, I finally updated the 4.2.1 cuz everyone said it was safe.
When I started the car I got a warning on the screen (should have taken photo), something about battery inoperable, or generator or something and to go see an authorized technician?
I'm probably nowhere close to what it actually said, I was on the phone and really distracted and when I clicked the CLOSE button I realized I shouldn't have done it and paid closer attention...
I will see if it pops again today

 

[JEB]

Still the same issue. Digging around there’s been more graphic harmonization with the Lightning/MME though.

Thanks for checking.

 

[zacko11288]

Soooo, I finally updated the 4.2.1 cuz everyone said it was safe.
When I started the car I got a warning on the screen (should have taken photo), something about battery inoperable, or generator or something and to go see an authorized technician?
I'm probably nowhere close to what it actually said, I was on the phone and really distracted and when I clicked the CLOSE button I realized I shouldn't have done it and paid closer attention...
I will see if it pops again today

Hopefully it's a one-time thing, did you get a notification in your Ford pass app by chance? Sometimes a copy of the error message is sent there

 

[JJSnell]

Hopefully it's a one-time thing, did you get a notification in your Ford pass app by chance? Sometimes a copy of the error message is sent there

Not a one-time thing, happened again and I got a photo this time.

 

[JJSnell]

Ok so ironically, I found another thread where the exact same thing happened after a spray in bed liner and thats what I had done ystrdy. Taking back to the guys in a bit and they are going to look at it...
(2) Pro Power Onboard Service Required error message | F150gen14.com -- 2021+ Ford F-150, Tremor, Raptor Forum (14th Gen) | Owners, News, Discussions

 

[JEB]

Ok so ironically, I found another thread where the exact same thing happened after a spray in bed liner and thats what I had done ystrdy. Taking back to the guys in a bit and they are going to look at it...
(2) Pro Power Onboard Service Required error message | F150gen14.com -- 2021+ Ford F-150, Tremor, Raptor Forum (14th Gen) | Owners, News, Discussions

Good idea to take it back to the bedliner installer. Ford is aware of aftermarket bedliners potentially causing problems if not installed properly and has instructed dealers not to fix these issues under warranty. https://static.nhtsa.gov/odi/tsbs/2022/MC-10228884-0001.pdf

 

[BoilerTimmay]

@rugedraw did you guys see they deleted the powerup Wikipedia page? We might have to keep that info here on the forum from now on.

 

[PadU235]

I just received this e-mail from Ford. Not sure what this means but I have a 2021 Job 1 Lariat.

 

[JasonATL]

I just received this e-mail from Ford. Not sure what this means but I have a 2021 Job 1 Lariat.

I have a 2021 Job 1 as well and received the same email this afternoon.

 

[Snakebitten]

Ford is shipping all us F150 owners new Sync4 screens for our non-Lightning trucks.

HammaMan is suggesting we not waste our time retrofitting.
I think I trust his advice.
He would know.

 

[m_bt54]

No email for me and my 21. I’m really feeling left out

 

[spiritrider1]

I have a 2021 Job 1 as well and received the same email this afternoon.

Same here. 2021 Job 1 and got the email a half hour ago. I clicked the link to "see what's coming" assuming it would show some images. Should have known better, it was a bunch of sales talk about all the wonderful things to expect.
I also noticed a lot of mention that you had to be connected to WiFi. I could have sworn there was some discussion earlier on this thread that OTA's did not require WiFi. So digging around a little more I finally found a definitive statement saying WiFi will update faster but the onboard modem should also work.

Sponsored