Request VIN Lookup Thread

[Mike G]

Recheck please after dealer updated my Sync - the paperwork doesn't have specifics:

1FTFW1E84NKD22312

So here's what they did:

And here's what they didn't:

That TCU update is key to getting more updates and features....

Sponsored

 

[Mike G]

Can someone check mine for any updates? 1FTFW1C58MFB84810 I got 3.5.2 on 11/1.

I can't see OTA status with FDRS but here's the list of available updates (which includes an APIM):

 

[Mike G]

Can I get an OTA vin check
1FTFW1RG0NFC41625

While waiting on OTA status..you show an APIM, WACM, and BCM as available updates.

 

[Kidder]

So here's what they did:

And here's what they didn't:

That TCU update is key to getting more updates and features....

Copy, thank you!

 

[Mike G]

Could someone check my VIN? It’s 1FTEW1EP9MKD69837. Last update I had was Oct 7th and it was to 3.5.2. Thanks in advance.

While waiting on OTA status here's the list from FDRS (with an APIM update available):

 

[pavementends]

It's a common issue from what I have been seeing lately. It downloads the first 3 files, and then it just hangs there until the OTA trigger expires.

Good morning, would you mind checking PTS again for my VIN 1FTFX1E8XMKE93061 to see if there has been any change/progress since this snapshot yesterday?

I left a Noco Genius 10 battery charger on it overnight Tuesday night and last night. The truck has had strong Wifi signal and AT&T cellular signal since you said 3.5.3 was queued on Tuesday. 3.5.3 has not installed yet. I wanted to eliminate battery SOC and wifi/cell signal from the reasons that this PowerUp isn't installing correctly. I don't think anything else is in my control.

 

[rugedraw]

Can someone check mine for any updates? 1FTFW1C58MFB84810 I got 3.5.2 on 11/1.

You got a PCM update on 11/1 and 3.5.2 on 11/10, but nothing since then and nothing in queue.

Can I get an OTA vin check
1FTFW1RG0NFC41625

You got 3.5.2 on 1/11; nothing in queue right now.

Could someone check my VIN? It’s 1FTEW1EP9MKD69837. Last update I had was Oct 7th and it was to 3.5.2. Thanks in advance.

No OTAs in the past 60 days and nothing in queue right now.

Good morning, would you mind checking PTS again for my VIN 1FTFX1E8XMKE93061 to see if there has been any change/progress since this snapshot yesterday?

I left a Noco Genius 10 battery charger on it overnight Tuesday night and last night. The truck has had strong Wifi signal and AT&T cellular signal since you said 3.5.3 was queued on Tuesday. 3.5.3 has not installed yet. I wanted to eliminate battery SOC and wifi/cell signal from the reasons that this PowerUp isn't installing correctly. I don't think anything else is in my control.

Same sh*t. Still only shows the first 3 files downloaded and the rest pending.

 

[pavementends]

Same sh*t. Still only shows the first 3 files downloaded and the rest pending.

Thanks a lot for this. Do you know what the "Target Identifier" column means? It looks like it downloaded the first three files to other "targets" just fine, then got hung up on whatever the 8060 "target" is. Anyone know what 8060 means?

@Jesse-Infotainment My truck is stuck downloading the 4th file included in PowerUp 3.5.3 package for 2 days now. It's been on a battery charger, had solid wifi and cellular signal. Any clue why and what happens next? Thank you

 

[Jesse-Infotainment]

@pavementends

THE NUMBERS TO THE LEFT ARE LOCATIONS INTERNALLY.

Not much you can do other than wait. I can send the update to manually install. Its 5.7 GB.

 

[pavementends]

@pavementends

THE NUMBERS TO THE LEFT ARE LOCATIONS INTERNALLY.

Not much you can do other than wait. I can send the update to manually install. Its 5.7 GB.

Manually install meaning through a USB memory stick in front of cup holders?

 

[Jesse-Infotainment]

Manually install meaning through a USB memory stick in front of cup holders?

yes

 

[pavementends]

yes

It looks like the OTA campaign/effort expires on Feb 7th, so let's see what it does in the next week or so. Thanks a lot you guys

 

[Kanuck]

I had a check on FDRS done last week and I was planning to do the APIM update this week. But, 3.5.3 was sent to my truck and installed yesterday. Could someone have a quick look and see if the APIM update is gone in FDRS? If not I will get a 2 day license and install the update.
Thank you in advance

1FTFX1E81MKE01710

 

[GrandpaD]

I guess my old bones are impatient/curious about what is lurking in the Ford cloud for my truck...and whether I want to invest in the whole FDRS thing. Got lucky with a PB Platinum with no deletions and want to insure it's up to date.

I'd appreciate someone giving my VIN a look-see.

1FTFW1ED8NFA99035

Thanks.

 

[WestlakeHorn]

Thanks in advance for your assistance --

vin 1FTFW1RG5NFB90705

Sponsored