Adding Co-Pilot Assist 2.0 with Forscan?

[superfordman]

I made a note change on that ABS value. I had a feeling the TBA wasn't needed, early on I thought it was related to something else, but it's for trailer backup assist is all, so should really be disabled in most cases, especially in 22+ trucks it seems like, as that might be causing issues elsewhere as you saw. Thanks for that.

You can update the CCM using the correct beta version of Forscan below along with a Mongoose. I had to force mine to -AL as FDRS would never show me an update for mine.

https://forscan.org/download/FORScanSetup2.4.7.test20221217.exe

Sponsored

 

[XLT22]

The download errors out each time for me unfortunately. Do you have the .vbf files saved by chance?

 

[superfordman]

Yep, I'll send it to you.

 

[dhageremtp]

Hey all what is needed to get lane centering working? I’ve got lane keeping, it’s like ping down the highway.

 

[AdamsCoyote]

Hey all what is needed to get lane centering working? I’ve got lane keeping, it’s like ping down the highway.

what have you done so far?

 

[dhageremtp]

what have you done so far?

Nothing as of yet. Do I need the radar module to enable it? I guess that was more my question at this point.

 

[AdamsCoyote]

Nothing as of yet. Do I need the radar module to enable it? I guess that was more my question at this point.

Gotcha! I wasn’t sure if you’d been following the process in the thread and having trouble or just getting started.

The lane centering is part of adaptive cruise. The lane keeping that you have now behaves just as you describe.

In short, you’ll need to install the CCM in the front bumper, either replace your bumper harness or wire to the CCM yourself. Once you do that you need to follow the FORScan instructions in this thread (look for the sheet earlier in this thread).

Once all that is done you’ll get the lane centering when you turn on cruise control.

 

[dhageremtp]

Gotcha! I wasn’t sure if you’d been following the process in the thread and having trouble or just getting started.

The lane centering is part of adaptive cruise. The lane keeping that you have now behaves just as you describe.

In short, you’ll need to install the CCM in the front bumper, either replace your bumper harness or wire to the CCM yourself. Once you do that you need to follow the FORScan instructions in this thread (look for the sheet earlier in this thread).

Once all that is done you’ll get the lane centering when you turn on cruise control.

Got it. Lane centering only works with cruise? Just trying to get my head wrapped around it all. Thanks!

 

[XLT22]

Only with Adaptive Cruise switched on and assuming your state bothers to repaint lane demarcations more often than every 20 years.

 

[superfordman]

Only with Adaptive Cruise switched on and assuming your state bothers to repaint lane demarcations more often than every 20 years.

Yup, this is currently my kryptonite around here, turnout lanes with no lines at all on both sides.
Sometimes it stays on course just fine, other times I start to go for a ride...

Did you get your CCM updated and make any difference?

 

[XLT22]

It updated fine but I’ve noticed no difference. The stop and go feature worked excellent in the mountain traffic yesterday. Still waiting on my steering wheel button to ship so I can close up the gap just a bit.

There is a 21 Platinum in a junkyard nearby that’s tempting me to go rip out all the modules to set up Bluecruise now for when the new update comes available.

 

[PFXLT]

It updated fine but I’ve noticed no difference. The stop and go feature worked excellent in the mountain traffic yesterday. Still waiting on my steering wheel button to ship so I can close up the gap just a bit.

There is a 21 Platinum in a junkyard nearby that’s tempting me to go rip out all the modules to set up Bluecruise now for when the new update comes available.

What modules would you need to rip out of a platinum for blue cruise?

 

[XLT22]

There are additional driver monitors and for sure the 360 Camera. Quite a bit more on the list depending on trim level. I will not get into the details other than saying you’re better off buying a truck with the prep package. Jesse is right that it’s best this information isn’t put out publicly for a multitude of reasons.

 

[dhageremtp]

Update on adding everything to a new 2022 rig. Got everything installed and working like it should, but no IACC still so working through that. TSR works just fine though and shows in the IPC, which was never working on this truck before as it wasn't really turned on and this truck doesn't have nav either like we've been discussing. It sees the speed signs and updates the sign in the IPC just like it should driving around. Strangely enough it acting exactly like my truck was with IACC when I was trying to get things figured out, it would work for about 90 seconds after keying on then error out almost to the second.

Another issue we're facing though is possibly the second hand, earlier build MY21 CCM my buddy picked up for it. I could never get it to calibrate successfully in his truck, had to set it all up, PMI, calibrate it in my truck (where it worked just fine like it should the short time we tested it) then move it over to this, PMI/change the VIN then it would work just fine. Everything worked fine and awesome for him on his way home, but half way on an hour drive it threw a pre-collision not available warning and then nothing worked and hasn't since. So my big question is I wonder if the older CCM software isn't jiving with all the newer 22 software on his truck right now??

@Jesse-Infotainment is there a way to update the CCM in question even though this 22 truck hasn't been networked scanned and/or reported back to FDRS that is has a CCM yet? Or would there be a better way to snag the newer software for just the CCM and try to update it somehow? I think it time to finally break the seal on my Mongoose box and give it a go for this plus try to get my own truck all updated.

@superfordman did you ever get this to work? Just pulled the trigger on a ccm and wireharness.

 

[superfordman]

@superfordman did you ever get this to work? Just pulled the trigger on a ccm and wireharness.

Not 100% yet, I was just thinking about this yesterday and haven't even had time here recently to touch by buddies truck in a while. A few others have made everything work on 22s so far, just TSR/IACC with nav deleted trucks seems to be the only hang up right now, otherwise everything else works just like it should, mainly ACC and lane centering.

Sponsored