Using The FOB To Activate Windows?

[jborbs]

Ignore my original question here, it was goofy.
What do the “—“ mean in the FORScan spreadsheet? I know X means ignore, and a value means change. What’s a dash?

answered my own question - that’s the checksum and you just leave it alone and let FORScan compute it. I was overthinking it :doh:

Sponsored

 

[jborbs]

They all need to be done except for the option to have the setting in your SYNC settings. If the setting is available in all of the relevant modules (BCM, DDM, PDM and APIM) in "easy mode", it should work from changing all of them. This is because when you use either easy or advanced editing, you are going into each module separately. It won't auto-magically change all the others by doing only one of them.

thanks friend! You got to me before I was able to edit and acknowledge how silly a question it was but I appreciate you answering it all the same.

 

[EdJ]

I just did this on my 22 lariat. It didn’t work! I double checked my values. They all looked good. Sad.

The old version is tough to use...the new ForScan version is much easier, go into the three modules and change the setting to "enable"...see attach

 

[EdJ]

I read in some vehicles you can lower your windows by pressing the OPEN button on the fob then pressing again for 1o seconds. Then after the window is partially down you can lower it further by pressing again. It does not work on my truck. Has anyone tried this?

Use ForScan and do this...

Sponsored