Switch Panel Mounting Platform

[4x4TruckLEDs.com]

So for years and years I've owned F150s. THe issue i've had with them all is that I never had a GOOD place to mount a switch panel. I've made custom brackets for my trucks in the past but decided it was time to come out with an elegent solution to mount a switch panel.

So I bring you the KR Off-Road Switch Panel Bracket that fits all 2015+ F150s.

This is a stainless steel bracket that we also powder coat black. It fits right under the hood on the passenger side and gives you a really nice place to mount a switch panel control box (such as the AuxBeam 8 port control box).

We're also offering this as a complete kit w/switch panel controller as well as the Swarfworks sunglass mount for the switch panel.

https://www.4x4truckleds.com/kr-off-road-switch-panel-bracket-for-2015-ford-f-150/

Sponsored

 

[Cblaxx19]

Does it work for the garmin power switch? I’ve got one that’s currently just sitting on my fuse box.

 

[4x4TruckLEDs.com]

Does it work for the garmin power switch? I’ve got one that’s currently just sitting on my fuse box.

Im not familiar with that one

 

[Facemelter]

Do you have the Swarfworks overhead in stock? I paid for the overhead direct from Swarfworks back in August and accompanied that buy with an email. Few weeks later sent another email, followed by a phone call and Facebook messages.

I have since gotten my money back and have NEVER heard from them with any kind of return call/message/email.

 

[4x4TruckLEDs.com]

Do you have the Swarfworks overhead in stock? I paid for the overhead direct from Swarfworks back in August and accompanied that buy with an email. Few weeks later sent another email, followed by a phone call and Facebook messages.

I have since gotten my money back and have NEVER heard from them with any kind of return call/message/email.

Yes we stock them. We offer it as a complete package with the switch panel

 

[JCM]

Yes we stock them. We offer it as a complete package with the switch panel

Do you stock the control wire extensions also, as I believe one is required to use this mounting location along with the Swarfworks overhead console mount.

 

[4x4TruckLEDs.com]

Do you stock the control wire extensions also, as I believe one is required to use this mounting location along with the Swarfworks overhead console mount.

yes we do, but they are not no our site. We stock them in our retail store.

You DO NOT need the extensions though.

Mount the Auxbeam panel to our KR Off-Road mount.
Run the control box cable through the passenger side firewall.
Then run the wire up along your pillar, BEHIND the airbag (don't block it... there's a wire channel in there) and then up to the roof liner. Then over to the sunglass holder.

Plenty of slack. No need for an extension.

Sponsored