Still missing features - 2021 Job 1 XLT

[dantheman68]

My page is still there but blank. I did get an OTA update to the latest version of sync so I have no idea why only the hard button bed camera works but the page on the right of the main display sits blank even after pressing the camera button at the bottom, it tries to load but stays blank

Sponsored

 

[unixadm]

Glad I was able to be of help.

@aiderbooze I think this is the same issue yours has. Check my post that he quoted and see what your truck shows there in FORScan.

Quick question. On my prior 2021 with the 360 Cameras, I was able to hit the camera button at speed and select the split screen side view cameras. On this XLT with the Copilot 2.0 Assist option, and the 360 cameras, I do have cameras at speed, but it's limited to the rear/bed camera only. Do you happen to know what I need to do to enable the split screen side view at speed? They worked with and without a trailer on my prior 21 Job 1. Just to confirm, my truck is 100% up to date with all Ford updates as of 09/12/25. Thanks for any help or ideas.

 

[unixadm]

Quick question. On my prior 2021 with the 360 Cameras, I was able to hit the camera button at speed and select the split screen side view cameras. On this XLT with the Copilot 2.0 Assist option, and the 360 cameras, I do have cameras at speed, but it's limited to the rear/bed camera only. Do you happen to know what I need to do to enable the split screen side view at speed? They worked with and without a trailer on my prior 21 Job 1. Just to confirm, my truck is 100% up to date with all Ford updates as of 09/12/25. Thanks for any help or ideas.

Disregard. I think I figured it out. I found another thread about split view, and there were a couple additional APIM settings required. I do have it stationary and will test it at speed tomorrow after making those changes.

Sponsored