Replacing CCD suspension with Fox or King

[TheGoatman]

It would be pretty sweet if the icon live controller could interface with the oem ccd module

Sponsored

 

[Snakebitten]

I still think that it's possible to fool the VDM into thinking the OEM CCD dampers are present, even though you have Swapped over to traditional analog hardware.

If these were Mustangs or Raptors or Porches, there would be an aftermarket market for replacement VDM modules, or custom flashes for the existing module. But somehow I don't see that happening with our trucks.

 

[nrs1417]

I still think that it's possible to fool the VDM into thinking the OEM CCD dampers are present, even though you have Swapped over to traditional analog hardware.

If these were Mustangs or Raptors or Porches, there would be an aftermarket market for replacement VDM modules, or custom flashes for the existing module. But somehow I don't see that happening with our trucks.

 

[nrs1417]

I still think that it's possible to fool the VDM into thinking the OEM CCD dampers are present, even though you have Swapped over to traditional analog hardware.

If these were Mustangs or Raptors or Porches, there would be an aftermarket market for replacement VDM modules, or custom flashes for the existing module. But somehow I don't see that happening with our trucks.

I can’t find that thread now where you showed changing values for the CCD…

 

[Snakebitten]

That's only a small portion of the VDM Asbuilt configure. Right?

Mine extends all the way to 721-37

And the values I spoofed the algorithm with were near the end. The ones that represent mass of the truck:

 

[wessermgm]

This is why I ordered FX4 on my 24 KR. I want to be able to modify my suspension without concern for all this. Kudos to you guys that can figure it out.

 

[kishorejoseph]

I will say I didn't try making any modification on the software side, but if anyone is considering the Kings with the reservoir...they do not fit the Powerboost engines. The reservoir goes up the shock mount and it does not work with some hybrid components up there. Fox's reservoir drops back down so they will fit.

 

[DBL R]

I will say I didn't try making any modification on the software side, but if anyone is considering the Kings with the reservoir...they do not fit the Powerboost engines. The reservoir goes up the shock mount and it does not work with some hybrid components up there. Fox's reservoir drops back down so they will fit.

Did you change over to the fox’s? If so any issues with drive modes? Better than ccd?

Sponsored