Need Help bad!!!..2021+ F150 people

[Tank]

HELP!!!!!...2021+ F150 people!!

I need front and rear measurements badly..

But for the rear, it has to be people with the Max Tow 3/4 floating 9.75 Max Tow axle.

Anyone off today and can help me with these measurements?....
...I kinda need them ASAP...

...thanks guys I sincerely appreciate the help!

Sponsored

 

[Buyer2021]

Gotta ask, what on earth are you contemplating that's so urgent?

 

[Tank]

Gotta ask, what on earth are you contemplating that's so urgent?

6 to 8 week lead time on custom wheels...
So, I'd like this info as fast as possible...are you gonna help me?

I've already posted this a week ago, but everyone loves asking questions, but no one has actually helped...
...so I'm already a week later, and still don't have the info I need.

 

[Buyer2021]

So, I'd like this info as fast as possible...are you gonna help me?

No, without apology I'm not gonna pull wheels and measure for your project.

Now gotta wonder why you don't do that yourself on your own truck ....

 

[SilverPigeon]

I don't think anyone has those measurements to hand; a small straight edge and a set of vernier calipers will achieve all, including finding the centre line of the hub for A through D by measuring its diameter, divide by 2 add that to a measurement of the other end of A through D to a straight point on the hub outside ?‍

 

[jhelrey]

Front

A-10"
B-32.25"
C-17"
D-3"
E-64.875"
F-1.125"

Rear

A-1.125"
B-64.875"
C-3MM
D-17'
E-32.25CM
F-144.441M

You're asking a lot of someone.

 

[Tank]

No, without apology I'm not gonna pull wheels and measure for your project.

Now gotta wonder why you don't do that yourself on your own truck ....

Apologize for what?...asking for help?..?

Think of the most logical reason of why I don't just simply do it myself....and post your answer of why you think...

 

[Tank]

Front

A-10"
B-32.25"
C-17"
D-3"
E-64.875"
F-1.125"

Rear

A-1.125"
B-64.875"
C-3MM
D-17'
E-32.25CM
F-144.441M

You're asking a lot of someone.

I know I'm asking a lot....which is why is said " thanks guys, I sincerely appreciate the help"..

And posting bullshit numbers isn't helping...

 

[Tank]

I don't think anyone has those measurements to hand; a small straight edge and a set of vernier calipers will achieve all, including finding the centre line of the hub for A through D by measuring its diameter, divide by 2 add that to a measurement of the other end of A through D to a straight point on the hub outside ?‍

Thanks I have calipers, and I'm a machinist, so I'm fairly certain I would know how to do it....there's a slight problem though...

So...can you help?

 

[SilverPigeon]

Thanks I have calipers, and I'm a machinist, so I'm fairly certain I would know how to do it....there's a slight problem though...

So...can you help?

Well, I live here:

So, if no one else comes through, and you're SURE that a non-PB King Ranch will have the correct measurements, I'll be able to look on my Tuesday (your Monday night) sometime. BTW, adding that small but significant bit of location info would, I think, have made people a bit more amenable ?

Is there any reason why a shop near where your truck is cannot take the measurements for you?

 

[StoneLariat]

6 to 8 week lead time on custom wheels...
So, I'd like this info as fast as possible...are you gonna help me?

I've already posted this a week ago, but everyone loves asking questions, but no one has actually helped...
...so I'm already a week later, and still don't have the info I need.

If they’re custom wheels why doesn’t the shop making them measure for you?? Sounds like a bad deal or people who have no clue what they’re doing.

 

[TremorDave]

 

[Tank]

Well, I live here:

So, if no one else comes through, and you're SURE that a non-PB King Ranch will have the correct measurements, I'll be able to look on my Tuesday (your Monday night) sometime. BTW, adding that small but significant bit of location info would, I think, have made people a bit more amenable ?

Is there any reason why a shop near where your truck is cannot take the measurements for you?

Thanks man, appreciate it..
If you could get just the front, because you don't have the Max Tow rear axle, that would help greatly..

 

[Tank]

If they’re custom wheels why doesn’t the shop making them measure for you?? Sounds like a bad deal or people who have no clue what they’re doing.

I told myself I wouldnt answer irrelevant questions that have nothing to do with the SPECIFIC help I asked for....but I guess I have to..

Because apparently NO SHOP has ever made custom wheels for a 2021+ MAX TOW axle to clear the larger calipers yet.......so they don't have the measurements on file...which is why I have to get them.

So...now can you help?

 

[Tank]

Sooooo many trolls are here in my thread...??

Sponsored