Mobridge DA-G2.Pro A2B Ford Preamp & DSP Help

[Tblack214]

Anyone with the new firmware manage to get the chimes working well? I can get them to be audible with a reset, but seems changing speaker mapping breaks it until you do another factory reset. The only way I can get it to work is setting my woofers as mids and setting them to specific channels. Trying to map the "Beeps" anywhere else doesn't work. Kind of sucks since the stock mobridge speaker mapping is all over the place and I can't load my saved tunes without breaking it.

It was nice to have chimes for about 5 minutes . Now I either have my DSP sound terrible or no chimes at all.

I reverted back to the latest stable so I can at least tune my DSP and have the chimes come from the IPC, but wanted to see if anyone else is having the same issue.

I have the latest version and have no issues with the chimes. I had it professionally tuned however.

Sponsored

 

[UncleTony]

I have the latest version and have no issues with the chimes. I had it professionally tuned however.

Yeah, I can tune it manually, I just spent a lot of time on the old tune and would rather have my woofers mapped as woofers (Not that it technically matters).

I also noticed that the chimes will still go through the IPC seemingly randomly, even when the chimes were working (Through the door speakers) the last time i drove it. Forscan also doesn't show any communication errors when the chimes decide to play through the IPC, so idk.

 

[UncleTony]

I have gotten used to the chimes coming through the IPC since I have had it installed that way for a year. Just disappointed that this isn't working properly yet.

 

[chris51080]

Have the chime and navigation prompt alerts been properly sorted with the Mobridge A2B units? Both the K2 and the stand alone DA-G2?

 

[UncleTony]

Have the chime and navigation prompt alerts been properly sorted with the Mobridge A2B units? Both the K2 and the stand alone DA-G2?

I can't speak to the DA-G2, but the nav works fine on the K2. The chimes are still not working. The beta firmware fixes the comms issues, but is inconsistent and the mapping is incorrect for newer trucks. Changing the mapping breaks the chimes. I reverted to the original firmware since the new firmware creates a safety issue (no chimes at all).

Sponsored