Maxzina F-150 Bed Side Rails Available Now!

[Maxzina]

Hey F150 Owners! ?️ Upgrade Your Truck with Heavy-Duty Side Rails (2015-2025 Models)!​

? Perfect Fit: Designed for your F150’s bed walls (under the rear toolbox), these aluminum alloy side rails are lightweight, rust-proof, and built to last.

Ultimate Utility:

L-Track Tie-Down System with adjustable O-ring tie-down anchors and L-track bolts lets you secure cargo of ANY size or shape.
Spring-loaded anchors lock firmly into the rails—no sliding, even on rough roads!
Versatile options: Hook bungee cords, strap down gear, or loop ties through the rings.

Note: If your truck is equipped with a DIBL (drop-in bed liner), please make sure to cut and reserve the original holes for installation.
Attention:Can only be installed at the screw hole below

? Check out the photos and watch the install video to see how easy it is to transform your truck bed!

? Exclusive 20% OFF for F150 Forum Members!
? LINK: https://www.amazon.com/promocode/A3Q8MYTX2YY41E
? CODE: JBBFGOCH
DEAL ENDS: June 13, 2025, at 23:59 PST!

? Join Our F150 Crew!
Got questions? Want more truck hacks? Join our Facebook Group to connect with fellow F150 enthusiasts and get insider tips!

#F150 #FordTruck #TruckMods #Overlanding #OffRoad #TruckAccessories #DIYInstall #DealAlert #TruckLife

Sponsored

 

[Kodiak]

Looks great! L-Track has a lot of options too.

Any plans on a black version? It is easily paintable but a black option would be a great addition to your lineup if possible.

Good luck!

 

[Maxzina]

Looks great! L-Track has a lot of options too.

Any plans on a black version? It is easily paintable but a black option would be a great addition to your lineup if possible.

Good luck!

Yes. We have a black version of the plan.

 

[sporkfed]

Great idea and design!

 

[basicbetty]

Nice job, so glad I don't have to DIY this. Waiting for the black option... let us know!

 

[bjl95mustang]

What gauge steel is the bracket that attaches the rail to the truck?

 

[Maxzina]

Great idea and design!

Thank you for your compliments!!!

 

[Maxzina]

Nice job, so glad I don't have to DIY this. Waiting for the black option... let us know!

Okay.Of course sure!When it available,I will post it on forum with 20% discount.

 

[Maxzina]

What gauge steel is the bracket that attaches the rail to the truck?

One moment please. We will measure the approximate thickness for you.

 

[Maxzina]

What gauge steel is the bracket that attaches the rail to the truck?

One moment please. We will measure the approximate thickness for you.

Thickness 3mm=0.118 inches.

 

[Henfield]

Guess they don't fit in the upper holes?

 

[Lead-Foot]

I would think the brackets would fit the upper mounting holes. The problem may be that the L track my not clear the upper bed rail support (jut-outs, see their 1st picture).

I ran into this when I was building my DIY E-track tie down mount and side panel equipment mounts. Ended up with revision #3 to get the mount and rail correct.

 

[Maxzina]

Guess they don't fit in the upper holes?

The upper has a curvature that may not match the rail, as the rail fits snugly against the inner wall.

 

[Maxzina]

I would think the brackets would fit the upper mounting holes. The problem may be that the L track my not clear the upper bed rail support (jut-outs, see their 1st picture).

I ran into this when I was building my DIY E-track tie down mount and side panel equipment mounts. Ended up with revision #3 to get the mount and rail correct.

Yeah.There are protruding parts on the upper level, which prevent the rail from matching with the upper hole position.So great that can be used normally after revision.

Sponsored