Looking for Snow Brush Storage Ideas

[Groovicles]

Hi everyone,

As the title says, I'm looking for ideas to store my 3' snow brush somewhere easily accessible in the truck bed which has a tonneau cover. I am aware of using fasteners like Quick Fist and affixing it to the inside of the tailgate. However, i have a bedslide in my truck bed which covers the tailgate entirely when its extended.

Anyone have any ideas for storage mods that don't involve affixing the brush to the inside of the tailgate?

Thanks!!

Sponsored

 

[GolfR]

Maybe something like this mounted to the boxlink?

https://www.amazon.com/Original-Qui...2431&sprefix=tool+handle+mount,aps,80&sr=8-15

 

[Blueshound]

I keep mine in the bin under the back seat. If I was going to put in the bed, I'd hang it on a couple of hooks on the 1 x 10 board that sits in the bed notches. That won't work with your bed slide though. Is there a place on the bed slide you could mount it?

 

[Groovicles]

Maybe something like this mounted to the boxlink?

https://www.amazon.com/Original-Quick-Fist-mounting-equipment/dp/B000CQPANY/ref=sr_1_15?crid=23INK5R6AJJEL&keywords=tool+handle+mount&qid=1655412431&sprefix=tool+handle+mount,aps,80&sr=8-15

Yeah, those are the Quick Fists I mentioned in my comment. Can't fit in on the tailgate, though they would work perfectly if I didn't have the bedslider

 

[Groovicles]

I keep mine in the bin under the back seat. If I was going to put in the bed, I'd hang it on a couple of hooks on the 1 x 10 board that sits in the bed notches. That won't work with your bed slide though. Is there a place on the bed slide you could mount it?

I could mount it on the back railing of the bedslide, but that would mean I'd have to pull the bedslide out each time which isn't always possible when I'm parked in a lot.

 

[GolfR]

Yeah, those are the Quick Fists I mentioned in my comment. Can't fit in on the tailgate, though they would work perfectly if I didn't have the bedslider

got it, I wasn’t familiar with these until I looked on Amazon. Could you make a plate or somehow mount these to the bed link cleat on the side of the bed above the wheel well?

 

[Fordphanatic]

Am I the only one that throws the brush on the floor in the back for the 4 months out of the year that we might get snow in PA?

 

[oncechance]

Am I the only one that throws the brush on the floor in the back for the 4 months out of the year that we might get snow in PA?

No, you're not alone.

 

[SakerlinaGuy]

If it’s a hard folding tonneau - perhaps use an adhesive to attach something to the underside of the first panel? Would have to be fairly low profile depending on how it folds up and all that but would seem like a logical place that’s out of the way of the bed slide.

 

[Calson]

I installed this mod made by BuiltRight

https://www.amazon.com/gp/product/B09JWTCJKP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

It makes it easy to flip the rear seat forward in the crew cab. I put a wiper/brush and shopping bags behind the seat.

 

[ryanc111]

Am I the only one that throws the brush on the floor in the back for the 4 months out of the year that we might get snow in PA?

Same here. But for the 5-6 months we might get snow here.

 

[JeffInCOS]

Behind the one of the backseats with a Velcro-attached apparatus?

 

[Tharnett78]

Screw some hooks into the underside of your cover at the end and hang it there.

Sponsored