***Limited Club***

[VAcraber]

I picked up my truck this afternoon. it was built on 1/22 and scheduled for delivery on 2/14. Hopefully some of you will get lucky as well on a shorter delivery time. A couple of things that I noticed right off was the top of the dash looks like hard plastic instead of leather, my '18 had a soft leather feel, the running boards are a bit louder that on my '18. What a smooth and quiet ride back home, 120 miles, can't wait to start tinkering with the setting tomorrow. Will post some pic.s tomorrow as well

Congrats! Mine rolled in today too. Built 1/23, scheduled delivery for 2/6. Found it sitting at the back of the lot all lonely. First ‘21 Limited I’ve seen. All icy and just perfect. Grabbing it tomorrow.

Sponsored

 

[J509]

Congrats! Mine rolled in today too. Built 1/23, scheduled delivery for 2/6. Found it sitting at the back of the lot all lonely. First ‘21 Limited I’ve seen. All icy and just perfect. Grabbing it tomorrow.

[/QUOTE

Congrats! Mine rolled in today too. Built 1/23, scheduled delivery for 2/6. Found it sitting at the back of the lot all lonely. First ‘21 Limited I’ve seen. All icy and just perfect. Grabbing it tomorrow.

Looks great even covered with ice. Is the color SQ?

 

[VAcraber]

Yeah couldn’t be more pleased with the color in person. It’s Carbonized Gray.

 

[charliecbp]

I'm not Sasa, but i'm a 2/9 build too! Maybe they are lining all the Limiteds up!

My Limited has a scheduled build week of 2/14

 

[J509]

Here are a few pictures of the new ride. I have a small amount of rust on the backside of the pumpkin and on the axle, all of which I will touch up myself. As of now the only project will be to tint the windows with formula one ceramic film.

 

[Jim Bandy]

Very nice - liking the white. Congrads

 

[zdjelar]

Here are a few pictures of the new ride. I have a small amount of rust on the backside of the pumpkin and on the axle, all of which I will touch up myself. As of now the only project will be to tint the windows with formula one ceramic film.

Great pics, thanks for sharing. A few questions for you...

1. Could you take wider, further out angle pic of the ProPower Onboard side of the truck? There is some debate if the "ribs" that hold the 2x8's that can act as a bed divider exist on both sides of the truck bed. It seems sooo odd that they would include them on the right, but not on the left. What would be the point?!

2. You mention you're going to touch up the rust spots yourself. Can you provide a bit more info on how you plan to do that? What goes into doing that? Is there first a step to sand/remove and then spray with something? (Rustoleum or similar?)

 

[91heelncville]

Very nice - liking the white. Congrads

Agreed. Awesome pix. Thanks for posting. Getting more excited every day.

 

[HMG2Ford]

Congratulations to ALL that have received their new Limited ... exciting times and the rest of us, which are waiting for our delivery, are becoming very anxious (at least me!!). My (AMB) build date has moved from 11-Feb-21 to 12-Feb-21 according to dealer so I have have a few more days to wait.

One question ... can you provide some feedback on your impression of the interior seats (i.e. color, comfort, etc.)? I've seen a lot of pictures but looking honest opinions. Thanks

 

[J509]

Hope these help answer your question. On the rust I plan to use a wire brush on my drill to remove as much of the rust as possible, prime and spray with rust oleum.

 

[J509]

For more ideas on the rust issue check out the thread- rust on rear end-any others, number 85. Currybob has a good plan of action

 

[zdjelar]

ok, so confirmed, there are no grooves/ridges on the left side, another words any dividers that may have been used in the past like simple 2x8's cut to fit won't work

 

[Jim Bandy]

Is that an OEM bed mat or aftermarket brand?

 

[J509]

It an after market mat that I bought at a truck accessory store, I used it in the bed of my ‘18 as well.

 

[Jim Bandy]

All, this 09:36 this morning (6 Feb), my General Sales Manager sent me my long awaited VIN + Window Sticker. My todate truck timeline:

1. Ordered truck: Nov 20th, 2020
2. Build Date: Week of 9 Feb, 2021
3. VIN # Assigned & Window Sticker (2nd or 3rd of Feb) - week before scheduled build actually my GSM was out of office. My GSM is also my salesman.
3. Projected Delivery Date: 1st or 2nd week of March - as we all know it depends on how fast transportation is moving during any weather issues etc...

Attachments

Sponsored