-
NOTE: THE MEMBERS MARKETPLACE SECTION IS FOR PERSONAL USE ONLY - I.E. SELLING ITEMS/PARTS FROM YOUR PERSONAL VEHICLE ONLY. ANY SALES OF ITEMS MADE FOR COMMERCIAL PURPOSES (I.E. MAKING/SELLING MULTIPLE ITEMS, TAKING ORDERS, ETC) BY ACCOUNTS NOT AUTHORIZED TO CONDUCT COMMERCIAL SALES ON THE SITE IS A DIRECT VIOLATION OF OUR FORUM RULES AND TERMS OF SERVICE AND WILL RESULT IN THE PERMANENT SUSPENSION OF YOUR ACCOUNT.
⛔️ EFFECTIVE JANUARY 16, 2023 ⛔️
ATTENTION SELLERS: All users who wish to sell in the marketplace are now required to abide by the following RULES. If a sales thread/post created ON OR AFTER January 16, 2023, does not comply, it is subject to DELETION without notice.
ATTENTION BUYERS: If you see a non-compliant sales thread, please REPORT the thread and take CAUTION when transacting.Rule #1 - Post a picture of the actual item you are selling (NO stock photos).Rule #2 - The picture must include a REAL piece of paper with your Username and the Date written on it next to the product you are selling. NO photoshop or digitally edited photos are allowed.Rule #3 - NO "feeler" threads are permitted. This section is only for items that are actually available and ready to be sold currently.Rule #4 - The listing must include an asking price. OBO (or best offer) is allowed but it must be accompanied by an asking price.Rule #5 - No "threadcrapping." Classifieds threads are not meant for negative discussions. Comments on pricing are not allowed. Only people with genuine questions and interest in the item for sale should be posting in the classifieds threads.
Sponsored
MuellerNautique
Member
How would I know whether or not this will fit my truck? I have a 2024 with I believe the 360 camera package. There’s an extra one on my display menu I think it’s trailer. I can check in the morning. I’d consider buying it. I have a rear mounted pool vacuum that would be nice to see from higher up. On my 2010 Lariat I used to have one of those RV wireless cams magnet mount to the roof.
OP
OP
BarryT82
Well-known member
- Thread starter
- #3
If you remove the screws holding in the third brake light and look at the harness connected above the headliner you’ll see the wiring. If the connector has the wiring that looks like this photo, then it’s prewired. If it only has a couple of wires, then it’s not pre-wired.
MuellerNautique
Member
Okay. I will take a look this week
I did the Forscan change to get the banner off of rear view camera at speed last night. I noticed that 360 camera is already enabled on my truck so I do have that, which I assumed because I can use it when parked. Also noticed a setting for:
Likely is compatible but I’ll make sure. Have a pool filter in the bed on a pallet today and man I’d like to watch it while driving.
Haven’t had a chance to pull the light off yet. Is there any tricks I need to be aware of, and are these as finicky in terms of sealing to the cab as the 12th gen was? About high tight do you do the screws? Any issues with leaks? Considering checking them with a torque driver before unscrewing.If you remove the screws holding in the third brake light and look at the harness connected above the headliner you’ll see the wiring. If the connector has the wiring that looks like this photo, then it’s prewired. If it only has a couple of wires, then it’s not pre-wired.
I did the Forscan change to get the banner off of rear view camera at speed last night. I noticed that 360 camera is already enabled on my truck so I do have that, which I assumed because I can use it when parked. Also noticed a setting for:
| Center High-Mounted Stop Lamp (CHMSL) Camera |
Likely is compatible but I’ll make sure. Have a pool filter in the bed on a pallet today and man I’d like to watch it while driving.
Sponsored
Nickelwork87
Active member
- First Name
- Nicholas
- Joined
- Oct 9, 2023
- Threads
- 3
- Messages
- 33
- Reaction score
- 4
- Location
- Bossier city , LA
- Vehicles
- 23 f150 lariat
- Occupation
- Custodian USPS
Is it still viable and price negotiable
Similar threads
