Waterfowler41
Well-known member
- Thread starter
- #1
In this one I install the 3rd brake light housing from as well as a basic + reverse wiring harness from LVJ Motorsports. I chickened out when it came time to tie the reverse wire into the BCM because of how tight the wire bundle was so I tied the reverse pod into Aux 6 switch and called it a day.
Overall a simple install, only real complicated part is wiring but even that is straight forward with a little bit of knowledge.
Overall a simple install, only real complicated part is wiring but even that is straight forward with a little bit of knowledge.
Sponsored
