Raptor 3rd brake light conversion

[Alonzo8388]

No not really, what are the overhead switches used for? I’ve done my interior pieces from a raptor, steering wheel and trim bezel

Sponsored

 

[Timsr]

Nice job But the circuit is 2280c pin12 high mount park light for f150

 

[Alonzo8388]

yea about that I did it and it did not work , and that’s the info BGG DESIGNS STATES on his how to 3rd brake light conversion ?

 

[RaphaelRondelli]

No not really, what are the overhead switches used for? I’ve done my interior pieces from a raptor, steering wheel and trim bezel

Hi!!

Where did you get the red flag for the trims?

Do you have Part Code?

Thanks!

 

[Alonzo8388]

It’s off a 21 ford raptor bezel trim. Found it on eBay sorry no part number on it. Just the only thing I could tell u is pull up a raptor vin and call your dealer and ask for a price on the trim and part # also.

 

[Jorge_14]

yea about that I did it and it did not work , and that’s the info BGG DESIGNS STATES on his how to 3rd brake light conversion ?

i just finished doing this mod also! So I did also plugged it in slot 12 and noticed that the 3 little LED red lights wouldn’t come on. I plugged it in slot 3 like what you said, and sure enough they come on. However, what I am seeing is that they don’t turn off even after 30 minutes. Is that normal? Thanks

 

[10R80Santi]

i just finished doing this mod also! So I did also plugged it in slot 12 and noticed that the 3 little LED red lights wouldn’t come on. I plugged it in slot 3 like what you said, and sure enough they come on. However, what I am seeing is that they don’t turn off even after 30 minutes. Is that normal? Thanks

i was looking into this mod, let me know if you get this resolved and how please. wanna be prepared before i start

 

[AntimatterJoe]

i just finished doing this mod also! So I did also plugged it in slot 12 and noticed that the 3 little LED red lights wouldn’t come on. I plugged it in slot 3 like what you said, and sure enough they come on. However, what I am seeing is that they don’t turn off even after 30 minutes. Is that normal? Thanks

You need to make sure it’s pin 12 on the C2280C bcm connector and not the C2280E connector. On the E connector, pin 12 isn’t used which is why it wouldn’t work and pin 13 is for the actual third brake light itself. Here are the pin outs of the connectors:

 

[ntesta378]

You need to make sure it’s pin 12 on the C2280C bcm connector and not the C2280E connector. On the E connector, pin 12 isn’t used which is why it wouldn’t work and pin 13 is for the actual third brake light itself. Here are the pin outs of the connectors:

So are you guys just splicing into that parking brake wire then at pin 12 to use as the power source ?

Got the raptor third brake light and trying to figure this drl wire out but the op info and pics are pretty vague.

 

[AntimatterJoe]

So are you guys just splicing into that parking brake wire then at pin 12 to use as the power source ?

Got the raptor third brake light and trying to figure this drl wire out but the op info and pics are pretty vague.

I haven’t done the swap yet but I have lot of the diagrams. When I did my hated steering wheel swap I didn’t splice into anything, ford basically made it so everything is there already. In this case, it would probably be simple as using an add-a-fuse

Sponsored