How To Install Factory 360 Camera System

[HammaMan]

It has worked flawlessly, honestly I don't see the need for the washer and Ford must agree as they have done away with it.

All the washer does is piss fluid all over the bumper. It's a PITA if you've recently cleaned the truck and just need a quick windshield wash. Now there's windshield washer fluid all over the bumper.

Sponsored

 

[RARankin]

Jesse got me covered. You can’t update mismatched hardware in FDRS. He got me the correct files and I was able to do it with Forscan.

I did calibration with FDRS. Everything is working great.

 

[nvabill]

All the washer does is piss fluid all over the bumper. It's a PITA if you've recently cleaned the truck and just need a quick windshield wash. Now there's windshield washer fluid all over the bumper.

Interesting, never thought of that.

 

[Jesse-Infotainment]

@Jesse-Infotainment may know the answer to that last question. Did you calibrate with FDRS?

You will not be able to update the IPMA in FDRS. FOrd has locked down their servers. used to be after an interrogator was run it would absorb the new module info if not the first time usually after a few times. They have changed it to now that no matter what the module data will not update. THe system has been told to ignore modules with a serial number that doesnt match what is stored on the server.

This started late last year or early this year. You will no longer get updates for the module you changed. THis can be an issue but IF you dealt with me.. I can help to get it updated.

 

[HammaMan]

You will not be able to update the IPMA in FDRS. FOrd has locked down their servers. used to be after an interrogator was run it would absorb the new module info if not the first time usually after a few times. They have changed it to now that no matter what the module data will not update. THe system has been told to ignore modules with a serial number that doesnt match what is stored on the server.

This started late last year or early this year. You will no longer get updates for the module you changed. THis can be an issue but IF you dealt with me.. I can help to get it updated.

Yup. Best to do biz w/ Jesse and co as I just witnessed FDRS being an ass last night with a new module. It refused to even acknowledge it was installed in the vehicle. Took a complete manual programming and software load on the module before FDRS would recognize it. This behavior of FDRS just not playing ball unless it sees precisely what it expects is new. Previously just installing it would allow a programming / PMI and all was good. Ford isn't just locking down new trucks with things like TRON, they're locking down FDRS even on earlier vehicles.

 

[f150 chili pepper]

Hey guys I am new to the site and was hoping someone can help me with my 360 camera system installation issue. I installed mirrors, front camera, bed camera, and harnesses from Ford. I acquired an IPMA from eBay. I programmed it via forscan per instructions by @jess-infotainment. I turned the system on and all cameras worked but needed calibration. Due to the Xmas tree of lights on the dash cluster, calibration was unavailable until DCTs were cleared. I was finally able to clear all DTC'S ?. When I went to reverse no split screen only rear camera not sure what to do now ? here's my vin#1FTEW1CPXPKD21304
I also have previously installed a 12" digital cluster.
Thanks again for your help

 

[f150 chili pepper]

not sure if i am posting in correct area? Also my reverse brake assist is unavailable? after IPMA reprogram DTC says rear camera alignment/calibration required. When i try to calibrate the camera it fails

 

[Aica0177]

BIG thanks to @Jesse-Infotainment I couldn’t accomplish these two projects without him. (Adding 360 view and front parking sensors on XLT).
Jesse walked me from day one through all the process and help me to get the right parts He replied me back every single one of my text (in seconds, literally im seconds) all the time he offered me his help and when the moment came he offered to remotely check all my settings (even on a late Saturday evening) this guy ROCKS , he is smart , helpful and supportive and very patient. THANK YOU JESSE I wasn’t able to do this without your help.

 

[Jesse-Infotainment]

BIG thanks to @Jesse-Infotainment I couldn’t accomplish these two projects without him. (Adding 360 view and front parking sensors on XLT).
Jesse walked me from day one through all the process and help me to get the right parts He replied me back every single one of my text (in seconds, literally im seconds) all the time he offered me his help and when the moment came he offered to remotely check all my settings (even on a late Saturday evening) this guy ROCKS , he is smart , helpful and supportive and very patient. THANK YOU JESSE I wasn’t able to do this without your help.

Glad to help. Glad you were able to get it all working. You did a great job with everything.

 

[Tlusk7]

You will not be able to update the IPMA in FDRS. FOrd has locked down their servers. used to be after an interrogator was run it would absorb the new module info if not the first time usually after a few times. They have changed it to now that no matter what the module data will not update. THe system has been told to ignore modules with a serial number that doesnt match what is stored on the server.

This started late last year or early this year. You will no longer get updates for the module you changed. THis can be an issue but IF you dealt with me.. I can help to get it updated.

sounds like what Apple is doing, and facing lawsuits for it. Glad you keep up with this shiz.

 

[Tlusk7]

not sure if i am posting in correct area? Also my reverse brake assist is unavailable? after IPMA reprogram DTC says rear camera alignment/calibration required. When i try to calibrate the camera it fails

Reverse brake assist is normal and because your 360 cams aren’t calibrated. Just went though this with another truck. As far as going into reverse and it not showing the correct screen, have you input the correct values in forscan?

 

[f150 chili pepper]

Reverse brake assist is normal and because your 360 cams aren’t calibrated. Just went though this with another truck. As far as going into reverse and it not showing the correct screen, have you input the correct values in forscan?

Yes I put the values you had on Google docs
I think it's the IPMA, it's an FS when I try to DL the asbuilt to it it says incompatible configuration

 

[Chevytwonova]

2024 250XLT with only backup cam, am I able to get the cab camera, wire, and add via forscan?

Anyone?

 

[HammaMan]

2024 250XLT with only backup cam, am I able to get the cab camera, wire, and add via forscan?

Anyone?

@Jesse-Infotainment is versed on the refreshed 250s and would know.

 

[Jesse-Infotainment]

2024 250XLT with only backup cam, am I able to get the cab camera, wire, and add via forscan?

Anyone?

No.

Sponsored