Front windows stopped working today

[Bart]

Of course the first major issue with my truck happens when I’m on a trip haha.

anyways, the rest of the truck has been completely fine but today the front windows stopped responding to the switches. You can’t even hear the motor activating so I assume it’s an electrical issue.

luckily they were already closed when thy stopped working but anyone have any ideas on how to troubleshoot?

Sponsored

 

[HammaMan]

Of course the first major issue with my truck happens when I’m on a trip haha.

anyways, the rest of the truck has been completely fine but today the front windows stopped responding to the switches. You can’t even hear the motor activating so I assume it’s an electrical issue.

luckily they were already closed when thy stopped working but anyone have any ideas on how to troubleshoot?

Do you have forscan with you by chance? Both front windows stopped working?

Check Fuse 6 (10a)
and 23 (30a) (Drivers door module)
and 26 (30a) (passenger door module)
in the BCM, located in the floor of the passenger side.

 

[Bart]

Do you have forscan with you by chance? Both front windows stopped working?

Check Fuse 6 (10a)
and 23 (30a) (Drivers door module)
and 26 (30a) (passenger door module)
in the BCM, located in the floor of the passenger side.

Thank you so much, I will check those fuses.

I have stopped about 8 times throughout the day and they randomly worked after 2 of the stops, then stopped working again next time I turned the truck on. Something definitely seems faulty

 

[Ben.K]

my drivers side window has been messed up lately. When I try to close it automatically, it will roll all of the way up then immediately rolls about 2/3 of the way back down. So to fully close my window, I have to gently feather the switch so it doesn't try to open back up. Like yours this is the first issue with my truck that was delivered in Aug '22 and I have only put 3500 miles on it so far.

 

[Kanuck]

my drivers side window has been messed up lately. When I try to close it automatically, it will roll all of the way up then immediately rolls about 2/3 of the way back down. So to fully close my window, I have to gently feather the switch so it doesn't try to open back up. Like yours this is the first issue with my truck that was delivered in Aug '22 and I have only put 3500 miles on it so far.

That sounds like the windows need to be calibrated. I think the fix is - hold the up button for 6 seconds when it is all the way up. This should reset the window control.

 

[Kanuck]

This is on page 162 of the 2021 manual

Resetting One-Touch Close
Carry out all steps within 30 seconds of
starting the sequence.
1. Close the window.
2. Press and hold the window control
switch until the window is fully open.
Keep the window control switch
pressed for a few seconds.
3. Lift and hold the window control switch
until the window is fully closed. Keep
the window control switch held for a
few seconds.
4. Press and hold the window control
switch until the window is fully open.
Keep the window control switch
pressed for a few seconds.
5. Lift and hold the window control switch
until the window is fully closed. Keep
the window control switch held for a
few seconds.
Note: Repeat the procedure if the window
does not close when you use one-touch.

 

[Ford Motor Company]

Of course the first major issue with my truck happens when I’m on a trip haha.

anyways, the rest of the truck has been completely fine but today the front windows stopped responding to the switches. You can’t even hear the motor activating so I assume it’s an electrical issue.

luckily they were already closed when thy stopped working but anyone have any ideas on how to troubleshoot?

Hi there. Can you send us a DM with your VIN and dealership info? I can look into this for you.

 

[Ford Motor Company]

my drivers side window has been messed up lately. When I try to close it automatically, it will roll all of the way up then immediately rolls about 2/3 of the way back down. So to fully close my window, I have to gently feather the switch so it doesn't try to open back up. Like yours this is the first issue with my truck that was delivered in Aug '22 and I have only put 3500 miles on it so far.

Hi there. Can you send us a DM with your VIN and dealership info? I can look into this for you.

 

[Ben.K]

Thanks Kanuck, this worked and now the window opens and closes like it should! I appreciate the suggestion.

This is on page 162 of the 2021 manual

Resetting One-Touch Close
Carry out all steps within 30 seconds of
starting the sequence.
1. Close the window.
2. Press and hold the window control
switch until the window is fully open.
Keep the window control switch
pressed for a few seconds.
3. Lift and hold the window control switch
until the window is fully closed. Keep
the window control switch held for a
few seconds.
4. Press and hold the window control
switch until the window is fully open.
Keep the window control switch
pressed for a few seconds.
5. Lift and hold the window control switch
until the window is fully closed. Keep
the window control switch held for a
few seconds.
Note: Repeat the procedure if the window
does not close when you use one-touch.

Sponsored