HammaMan
Well-known member
- Thread starter
- #1
For sale, complete, like new Lariat seats, includes tilting headrests and all covers for rear seats and rear headrest covers (I believe they're both 10 way power seats). The leather covers are brand new. Mint perfect! Local pickup only. Also includes access to my notes and knowledge. Includes complete wiring harness for seats and PRBS. You can also swap to a memory door lock and gain memory seating positioning as well as 'easy entry/exit' where the seat moves back on key off (also controls memory mirror positions if you've got them). Will also provide up to 1hr assistance on install (I've gotten really quick at tearing these trucks apart) performing the more technical parts of the install (it's real easy)
Also includes a spare 20a fused / keyed hot wire for additional add-ons if you so choose.
Your factory seats have ~$800 resale value! Works in 21-25 XL/XLTs.
This seat (pass) still has original cover on it, will install new one before handing over - I'm quick w/ cover swaps. Covers as received were in excellent condition, but not new new.
Rear seat covers - Seat bottoms/backs are stored inside of each other - Just carpet fuzzies on them - Perfect condition
Not pictured but included, Passenger seat headrest, REAR: Backs and bottoms for both seats (4 parts) 3 leather headrest covers.
New HVAC unit to control seats -- out of a 23 Raptor, just needs your asbuilt copied over.
This is what a complete OEM-style install looks like including PRB harness.
Pin & Play wiring example, populates factory pin locations between seats, has power wires that tie into BCMC connector and MS1 bus.
If you're within a few hours drive of this location Reach out to work something out. I've done mods on several members trucks and tech-supported countless others.
Over 200' of wiring in the custom harness -- this doesn't need to make sense to you, I'll pin out the confusing stuff and hard to reach stuff. Ends up with a factory finish and does not 'tap' any wires, populates into factory harnesses. @ReverendQ can vouch for the results.
Also includes a spare 20a fused / keyed hot wire for additional add-ons if you so choose.
Your factory seats have ~$800 resale value! Works in 21-25 XL/XLTs.
This seat (pass) still has original cover on it, will install new one before handing over - I'm quick w/ cover swaps. Covers as received were in excellent condition, but not new new.
Rear seat covers - Seat bottoms/backs are stored inside of each other - Just carpet fuzzies on them - Perfect condition
Not pictured but included, Passenger seat headrest, REAR: Backs and bottoms for both seats (4 parts) 3 leather headrest covers.
New HVAC unit to control seats -- out of a 23 Raptor, just needs your asbuilt copied over.
This is what a complete OEM-style install looks like including PRB harness.
Pin & Play wiring example, populates factory pin locations between seats, has power wires that tie into BCMC connector and MS1 bus.
If you're within a few hours drive of this location Reach out to work something out. I've done mods on several members trucks and tech-supported countless others.
Over 200' of wiring in the custom harness -- this doesn't need to make sense to you, I'll pin out the confusing stuff and hard to reach stuff. Ends up with a factory finish and does not 'tap' any wires, populates into factory harnesses. @ReverendQ can vouch for the results.
Sponsored
Last edited:
I’m tired of sitting on the “floor” of my truck
