Electrical issues after center console shifter install

[Gary03l]

I recently installed a console and console shifter on my 2022 F-150. After the install a few service populated in the cluster:
- Check locking differential.
- Service Vehicle soon.
- Shift Sytem Fault.
- Auto hold system fault.
- Pre-Collision assist not available
- Service advanced trac
- Check 4x4.

I am able to drive the truck fine, I did notice that the turn signals don't work, the steering wheel buttons do not work, and the only function on the turn signal lever is the wiper when I turn it to max speed. Has anyone experienced anything like this? Or is there something I should check? Thanks

Sponsored

 

[Gary03l]

I forgot to add, I put the original column shifter back on and it doesn't make a difference, it still shows the service messages and the E brake engages and won't come off.

 

[Wes1963]

I think I would double check the connections on the back of the climate control panel as well as the console connector that is down by the passenger seat.

 

[Gary03l]

I think I would double check the connections on the back of the climate control panel as well as the console connector that is down by the passenger seat.

I check the connectors behind the climate control panel again.
I didn’t plug the console connectors by the passenger side since it was a different style plug. The only connector that I cared about was the one for the shifter which I got the harness from infotainment.

 

[Wes1963]

Is your truck push button start?

 

[Gary03l]

Is your truck push button start?

No.
its a regular cab XLT.

 

[a-estr49]

did u ever figured it out i got a 22 xlt single cab digital cluster and 12'' screen done and i just did the center console and shifter swap and am getting the shifter errors and will not let me go in d or r before it goes back to park by it self, also wrench light comes on, installed the oe back and it works normal.

Sponsored