Driver’s PB Window Glitches

[Fugalapa]

Following a dealer reboot of my ‘22 Power Boost (for unrelated reasons) in December, the driver’s power window has become glitchy and unreliable.

In this forum, I found a reference to the owner’s manual recommendations for resetting the power window switch, and I employ the procedure regularly to make the window function.

Naturally, the dealer has been unable to replicate these behaviors, finding no errors:

First, the auto down/up function ceased working — intermittently,

Then, upon start up in Electric mode the window was non-functional until the engine started,

And now, it’s a flip of the coin if the window works without powering down and restarting, or some other random sequence of switch manipulation.

(On Christmas morning, the truck full of gifts, food and humanity, we had to switch to the tiny Escape to make our holiday journey. Not good.)

Hoping someone has sympathy and counsel!

Sponsored

 

[HammaMan]

Could be an issue with the switch, the DDM, or the harness. The switch talks to the DDM for the front windows via linbus. whereas the rear 2 are manual switches. The window is highest amperage function for the DDM so it could also be power delivery / ground if everything else works okay.

 

[tbinmd]

had some oddity with my drivers side window, ended up being a very low SOC on the battery. May want to check your battery and throw it on a charger.

 

[Mash150]

Interesting. Picked up my truck from dealer work on Friday. Saw this on the invoice. Tried out the window which opened but failed to close properly and initiated the bounce back procedure . Got it closed by the override. Going to try and reset the auto up/down function at some point and see what happens. I’m thinking it might have been frozen with the winter weather we have been having .

Sponsored