Can't View Bed Camera on Info Card

[ranorris2]

I recently purchase a 2021 F150 502A and have made a few Forscan changes, which all have worked well except one....enabling the info card to display the bed camera while driving. It is currently blank with no view, however it does have the soft camera button but it appears to do nothing. I have enabled cameras at speed which works, but I don't want to take the full screen to view I prefer it on the smaller card so I can still use the Sync screen for other things. I've searched all over different forums and can't seem to find any answers to this.

Here are the changes I made for the enabling the camera at speed and the info card:

Does anyone know if I am missing any Forscan changes? Is it possible I need to update one of the module FW versions?

Also, if it matters my Sync version is 23159-915.

Thanks.

Sponsored

 

[unixadm]

I know on my MY21 F150 Platinum, it did not have that option initially. After performing many module updates, that option became available. It could be possible your vehicle is behind with updates, and the AS Built changes are not having the effect you are expecting because of that.

 

[ranorris2]

Thanks! I guess I’ll start looking into FDRS and attempt to get my modules update.

 

[BapPlattyF150]

I Installed a bed camera as mine came with the delete. I was able to enable the camera view through Forscan. But the button doesn’t work while I’m driving. Anyone know how to enable the camera while driving through Forscan?

 

[ranorris2]

I Installed a bed camera as mine came with the delete. I was able to enable the camera view through Forscan. But the button doesn’t work while I’m driving. Anyone know how to enable the camera while driving through Forscan?

If you haven't already, it sounds like you just need to make the changes listed in my original post screenshot to enable camera views at speed.

Sponsored