WBravo
Active member
- First Name
- Westley
- Joined
- Jan 9, 2024
- Threads
- 5
- Messages
- 29
- Reaction score
- 35
- Location
- Chattanooga, TN
- Vehicles
- 2023 F150 Tremor 3.5EB
- Thread starter
- #1
Woo first post!
Forgive my ignorance as I’m a rookie joining into the 150. I got my 23 Tremor end of December 23’ and despite a few little hiccups (custom order truck that was orphaned) I am absolutely loving it.
I’ve had a more practiced hand assisting me, and with @Livnitup ‘s stellar code sheets, made some modifications via Forscan. I’m getting my head wrapped around it, if slowly. However, when I was driving The handful of demo trucks my dealer allowed me to run off with, one of the traits the 21 Raptor I drove had that I’ve wondered about was with the 360 split screen camera view. I noticed that when if you were to go into reverse, backup, then into drive, the display would swap from the rear facing camera + 360, to the front facing camera + 360. Has anyone else seen this and, if so, can it be implemented via Forscan?
Totally unrelated (I hope) I too seem to have just received the 6.2.0 Power-Up update, which says it was successful on FP. I’ll continue following the dizzying array of posts about what is hopefully BC 1.3 coming to the 150? These updates don’t seem quite as straight forward as those I get from Garmin for the thing with wings - Cheers!
Forgive my ignorance as I’m a rookie joining into the 150. I got my 23 Tremor end of December 23’ and despite a few little hiccups (custom order truck that was orphaned) I am absolutely loving it.
I’ve had a more practiced hand assisting me, and with @Livnitup ‘s stellar code sheets, made some modifications via Forscan. I’m getting my head wrapped around it, if slowly. However, when I was driving The handful of demo trucks my dealer allowed me to run off with, one of the traits the 21 Raptor I drove had that I’ve wondered about was with the 360 split screen camera view. I noticed that when if you were to go into reverse, backup, then into drive, the display would swap from the rear facing camera + 360, to the front facing camera + 360. Has anyone else seen this and, if so, can it be implemented via Forscan?
Totally unrelated (I hope) I too seem to have just received the 6.2.0 Power-Up update, which says it was successful on FP. I’ll continue following the dizzying array of posts about what is hopefully BC 1.3 coming to the 150? These updates don’t seem quite as straight forward as those I get from Garmin for the thing with wings - Cheers!
Sponsored
