Build week 4/29 -5/6

[Z06Pat]

So who do we leave left in this build week still waiting?

"Quality Hold" still in Production

Sponsored

 

[30snack]

I am still waiting for the recall for the PowerBoost software update. The truck has been sitting at the dealer for a week.

My dealer told me that was not a thing that would stop delivery on mine. Also a Powerboost

 

[30snack]

"Quality Hold" still in Production

That just plain sucks man…..mine was released from that on June 2nd then didn’t actually ship until 18 June.

 

[Z06Pat]

That just plain sucks man…..mine was released from that on June 2nd then didn’t actually ship until 18 June.

I am trying to get a clear screen shot of VinView. The one sent I can't read and it gets worse when you zoom in.

If anything, there's only (6) miles on her per the Diagnostic screen which is most likely the bouncing between Production and Ground Effects.

The last time I saw the screen shot, she had gone from blend to Production to Ground Effects to Production 02-04 Jun where it has sat. The bottom of the picture looks like it went back to Ground Effects then back to Production and says "Quality' in the bottom box. I wonder if something with the spray in bedliner or the wheel well liner had an issue. If the bed liner that would suck to have to remove and respray it. I'll be looking for over spray whenever it arrives. I bought a new 1997 Trans Am WS6 that had a door ding repair while on the lot and there was over spray (black) all over the spoiler, decklid and bumper that took some love and a clay bar for me to remove.

@SingleSpeed427

 

[30snack]

I am trying to get a clear screen shot of VinView. The one sent I can't read and it gets worse when you zoom in.

If anything, there's only (6) miles on her per the Diagnostic screen which is most likely the bouncing between Production and Ground Effects.

The last time I saw the screen shot, she had gone from blend to Production to Ground Effects to Production 02-04 Jun where it has sat. The bottom of the picture looks like it went back to Ground Effects then back to Production and says "Quality' in the bottom box. I wonder if something with the spray in bedliner or the wheel well liner had an issue. If the bed liner that would suck to have to remove and respray it. I'll be looking for over spray whenever it arrives. I bought a new 1997 Trans Am WS6 that had a door ding repair while on the lot and there was over spray (black) all over the spoiler, decklid and bumper that took some love and a clay bar for me to remove.

@SingleSpeed427

Whoever sent you those pics is playing with your emotions lol

 

[Z06Pat]

Whoever sent you those pics is playing with your emotions lol

Yes.....

 

[lrb_35128]

<sigh> Who's on first? Follow The Tracker. I've heard that from Ford Chat, Ford Marketing, Ford Cust Service on this forum, and the salesperson. The issue is the tracker only drives more questions and has proven to not reflect reality.

Egad... Seems every time one of us escapes Limbo a chaos storm erupts and flummoxes things for those still trapped...

 

[SingleSpeed427]

My dealer told me that was not a thing that would stop delivery on mine. Also a Powerboost

Same... I pick mine up this Friday 6/28 at 10:30AM. Everything is installed and detailed.. ready to go. No hold-ups here.

Oh.. and btw.. arrived with 87 miles on it. Sort of annoying, but apparently it was QC'ed twice (two stickers on it), so hopefully it's perfect!

-=Mike G.

 

[Z06Pat]

Egad... Seems every time one of us escapes Limbo a chaos storm erupts and flummoxes things for those still trapped...

 

[mwf5888]

My software recall for cylinder misfire was completed this morning and I have the truck this evening for an overnight test drive. Everything on the truck is correct and functional including BlueCruise lane change.

That being said, most dealers still don't have access to CDK which was hacked twice last week and won't be fixed this week. So, hopefully, next week I can get a deal on the computer with lease residual, rate, and payment.

I have discovered I won't need FORScan for what I have done in the past. The following are in the Vehicle Settings menu.

1. Double honk - called Key Detection Alert.
2. Global Windows called Windows Remote Open.
3. Autofold Mirrors.
4. Gauge numerical values called Temperature Gauge Option (steering wheel menu).

Pictures below in the same order.

 

[wyoming]

My software recall for cylinder misfire was completed this morning and I have the truck this evening for an overnight test drive. Everything on the truck is correct and functional including BlueCruise lane change.

That being said, most dealers still don't have access to CDK which was hacked twice last week and won't be fixed this week. So, hopefully, next week I can get a deal on the computer with lease residual, rate, and payment.

I have discovered I won't need FORScan for what I have done in the past. The following are in the Vehicle Settings menu.

1. Double honk - called Key Detection Alert.
2. Global Windows called Windows Remote Open.
3. Autofold Mirrors.
4. Gauge numerical values called Temperature Gauge Option (steering wheel menu).

Pictures below in the same order.

Good catch on the double honk! I disabled it in ForScan so quickly when I got home that I didn’t even see this setting!

Also, when did the key fob quit flashing red/green on remote start?

 

[30snack]

My software recall for cylinder misfire was completed this morning and I have the truck this evening for an overnight test drive. Everything on the truck is correct and functional including BlueCruise lane change.

That being said, most dealers still don't have access to CDK which was hacked twice last week and won't be fixed this week. So, hopefully, next week I can get a deal on the computer with lease residual, rate, and payment.

I have discovered I won't need FORScan for what I have done in the past. The following are in the Vehicle Settings menu.

1. Double honk - called Key Detection Alert.
2. Global Windows called Windows Remote Open.
3. Autofold Mirrors.
4. Gauge numerical values called Temperature Gauge Option (steering wheel menu).

Pictures below in the same order.

That is great news for both of us lol…..I didn’t want to mess with Forscan for those things. The only new info I have received is someone denied my FordPass at 754 yesterday morning while they were unloading the train.

 

[mwf5888]

I noticed that there isn't a number on the RPM display. And, unlike my wife's 2024 Escape, you can't change the look of the gauges either.

 

[Z06Pat]

I am living vicariously through everyone else on this thread. #F150Envy

 

[SingleSpeed427]

I am living vicariously through everyone else on this thread. #F150Envy

To help, I'll post some pics with Atlas Blue in them when I pick up my truck tomorrow. (wait.. that might not be "helping" )

And btw.. confirmed that mine does not need the "update" applied, so it must have been applied as part of the QC before it was shipped on 6/20. Maybe that explains additional ~40 miles on it.. another QC drive. (my truck arrived with 87.4 miles vs. the 47 it had earlier in it's "ship" week.)

Sponsored