Best place to pick up switched +12V for Dash accessories?

[UGADawg96]

Has anyone run wires from the passenger foot panel up to the center dash area where the speaker is and if so, how was it ? Trying to get an idea before ripping apart my dash if it can be fish taped easily by only removing the speaker panel and foot panel or if more has to be dissected. Will be installing the Builtright Dash Mount and considering hardwiring leads for accessories versus having wires hanging down to the usb ports and 120v plug for a cleaner install.

Sponsored

 

[UGADawg96]

Has anyone run wires from the passenger foot panel up to the center dash area where the speaker is and if so, how was it ? Trying to get an idea before ripping apart my dash if it can be fish taped easily by only removing the speaker panel and foot panel or if more has to be dissected. Will be installing the Builtright Dash Mount and considering hardwiring leads for accessories versus having wires hanging down to the usb ports and 120v plug for a cleaner install.

I got answers from this thread along with some PM's with the OP.

https://www.f150gen14.com/forum/threads/kicker-amp-morel-speakers-audio-upgrade.17364/

Then I ordered these items:

https://www.f150gen14.com/forum/thr...to-your-f-150-today.1314/page-297#post-344688

Will post up once project is complete.

 

[fisch]

Will post up once project is complete.

Hi @UGADawg96 - would really love an update if you have one, I need to do the same and detailed success stories for clean installs are few and far between ... Thank you!

 

[UGADawg96]

Hi @UGADawg96 - would really love an update if you have one, I need to do the same and detailed success stories for clean installs are few and far between ... Thank you!

Check this out: https://www.f150gen14.com/forum/threads/builtright-pro-dash-mount-hardwired-12v-and-usb.17703/

 

[fisch]

Check this out: https://www.f150gen14.com/forum/threads/builtright-pro-dash-mount-hardwired-12v-and-usb.17703/

I try to avoid "thanks" posts - but thanks! It's infrequent that folks even follow through on sharing back - let alone post the very detailed writeup that is ^

 

[Jordon]

Hi Adam,

Thanks for the clarification, I couldn't remember off the top of my head before. Here is the sheet I made while I was figuring out what fuse locations to use.

Thank you, I'm going to wire in after market seat ventilation and will be using #36

Sponsored