2025 disabling seat belt chime?

[cdestuck]

I would really like to disable my seatbelt chime. I have a Mile year 2025 platinum with the power based. I know in the instructions. It tells me to set the parking brake, push the start button without my foot on the break and then wait till the seatbelt light goes out and then you stay four times and then I’ll end up with the fifth time to the same one.
Well, in my case, I set the alarm and push the button to go accessory and I can wait till the cows come home in the seatbelt reminder light does not go out. I am wondering if the model year 25 they leave the capability to shut the chime off. The instructions still are in the manual hall. So has anyone with a 25 model year successfully, disabled their chime? Tks.

Sponsored

 

[StarWhiteCoyote]

I tried with my 24 today actually, same thing. Light never went out.

 

[H82bbad]

On my 24 turn on ignition and plug unplug seat belt 4 times. It didn't change. I tried again and did 5 times and it worked.

 

[StarWhiteCoyote]

5 clicks worked!

 

[jnstev1]

I used forscan on my 24 F-150. Use as built and remove the seats completely and you will have nothing in the dash about seat belts at all. Not even the red seat belt light

 

[{tpc}]

I believe on the newer ones that eventually you can switch out of the seatbelt screen on the dash, and once you do that, I think thats the only indicator. But it does take a minute or two. Or three or four, lol.

 

[Robert B]

a thread like this went around a couple of weeks ago. I think I started it with the same question - how to disable the seat belt chime on a 2025 F-150, I've got the King Ranch.
Bad news the instructions in the manuals do not work on the 2025's. I just took it to the Ford dealer and had them use their software to disable the chime under warrentee, or you can use Forscan and do it your self.

 

[cdestuck]

5 clicks worked!

dd your seat belt warning light ever go off before you started the seatbelt clicking?

 

[H82bbad]

dd your seat belt warning light ever go off before you started the seatbelt clicking?

Turn key on, click seat belt and unlock it as soon as it says lock, unlocked. Mine said fo 4 times. Nothing. But tried it 5 times and it was good. Seat belt light started flashing. You have to do it for all belts you want it turned off on.

 

[cdestuck]

Turn key on, click seat belt and unlock it as soon as it says lock, unlocked. Mine said fo 4 times. Nothing. But tried it 5 times and it was good. Seat belt light started flashing. You have to do it for all belts you want it turned off on.

ok. Will try tomorrow just as you say.

 

[jnstev1]

Use forscan and use as built. Find the seats and indicate that there is no seat for all seats. This disable the seat beat chime and the start up seat display on the dash. I have a 2024 lariet. No issues by doing this.

 

[Lariatdude]

Follow the manual sequence as instructed. But at the beginning instead of waiting for the seatbelt light to turn off before doing the click and unclickk, start the sequence when the airbag light next to it goes out. Actually had someone on here recently share this tip with me and it worked.

 

[ERO79]

This is done on an F-250, but it worked on my 2025 F-150.

https://www.facebook.com/share/r/1CPe5brkQX/

 

[cdestuck]

After I had some recall software up dates, my seatbelts started dinging again. I had previously did the bypass but had to use 5 hook ups. Now to get it to bypass again, I had to do 6 hook/unhooks. I have a 2025 f150 platinum

 

[Weller12]

I used forscan on my 24 F-150. Use as built and remove the seats completely and you will have nothing in the dash about seat belts at all. Not even the red seat belt light

I looked in the IPC and there are about 15 lines for seatbelt chime. Most of them are off but I believe there are 6 that are enabled. Should I disable those? Or where do I remove the seats? Will removing the seats mess with heated seats.?

Sponsored